The Jalopy Journal
Not easy based on what has been described. The 40 body narrows at the seat front unlike most later cars. So the bucket seat sizing is a challenge....
page #7. suggestion is to measure the paper drawing to make sure it is 1:1 with your measurements.
Try to google 1967 corvette reverse switch (images), I think it will work for you
Posted using the Full Custom H.A.M.B. App!
you buy these and your life will be limited due to their quality....
Agree with the other comments. I wouldn't bore it unless necessary. The thinner the wall, the more prone to overheating.
^_ Same as Vanislander, I had the smallest amount of tension on the adj rod between the pedal & cyl. I wouldn't allow the master cyl to fully...
There are guys on fordbarn that will sell you an original set with keys for a reasonable price. just either do a search or post in the wanted section.
Sorry, don't have the solution that you are looking for.
I like the simplicity of the tank itself so I would keep it as is. Can you get the gas...
Don't assume the gauge is grounded on its own due to the mounting. It needs its own separate ground to the (-) input on the gauge itself, since...
I have the same year/car. I put the juliano's kit in mine. I would really have liked a shoulder strap, but that would look awkward. The seats with...
with the belt off completely, how much drag is there on the PS, Alt, AC when you rotate them by hand?
I spent the weekend altering the autoloc 3rd brake light to work. Luckily removing some bad diodes inside it now works for my application. I...
X2 on precision they fit well.
Are you restricted to a I-6 or can you go with w V-6?
for my 39 ford, they are both on the driver's side top of the frame rail. The first is just 3" back from the front cross-member. The second is...
The numbers were stamped by hand, in random spacing, so don't think it looks uniform
I thought to only difference between 39 & 40 was the door pull color. They can me ran with the 41+ switches, I think they are better than the 39s
it wasn't obvious, but have you determined your steering box selection yet, cuz it changes some things. If using the original, then the center...
birth of hot rodding pg 23 the story of the dry lakes era
says he was with the road runners 1948 & 1949
For the C2 series, the SBC stamp pad should all start with F from the Flint location. all C2 SBC's came from Flint.
F01 = Flint, jan 22
Don't laugh. It kinda looks like the color of the project copperhead truck that stacy david did on trucks/gearz way back when
This story sounds like the per-cursor to sellers remorse in a few years.... I would sit on it for 6+ months and then re-evaluate.
Agreed with ^^. If you don't get the kit, I would use the zinc plated for the ones that go fully through, and a maybe regular ones for the others.
I learned to drive in one of those, same color and everything. If you can, can you post pictures of the inside? Gives me a little tear in my eye
See Pic MVC-017F.JPG there is a rubber flap that has been added between the top of the fender and the top of the battery to hide where the hoses...
Is the ticking possibly in the distributor locations? any chance something broke off inside the dist?
Separate names with a comma.