The Jalopy Journal
Nice to see the build McFly!
Sent from my LG-H918 using The H.A.M.B. mobile app
Here is one on a 1947 Ford Sedan Coupe a friend and I did a few years back....
Hey Brent! Any more progress? Haven't seen you around.
Ah makes sense now. At the time, everything seemed to fit right. I have the front clip off right now. I'm sure I will regret it once I start to...
I guess everything you went through would explain my pictures. Glad you got it figured out!
Hey Buddy - I have a 3.00 I'll trade you for your 3.55 if you are interested. I'm also glad you got to give your friend a ride. I did the same...
That almost looks like your hinges are too close together creating a bow on the top of the hood. I didn't have that problem with mine.
Looking at the pictures, I am starting to remember the bolt holes do not line up. I believe I had to fit it, drill a couple holes to adjust it,...
Pony up the $ and get them from Shoebox Central?
Well hope it is that easy! I would consider it lucky if it is! When I had my muncie, I was able to unbolt the transmission mount and pick up on...
Pete - does it wiggle at that point when you shift? If the bottom bolt is tight enough, you might only get a small deflection there, you might...
I'm a little late to this conversation but I went through this a few years back. I hated my 49 hinges so I found a 50 at a junkyard. I know you...
That's a cool shot with the frame....
Do you know what tire size you ordered?
What size did you end up ordering? Aren't your rims 7" wide?
I always have to push it back too but I think the cable is just old. I just ordered one from Shoebox Central, hope its better.
No problem, glad to help.
If you are working on the passenger front, there is no distribution block. It is a direct connection. Here's a picture.
Your car had a See-Clear accessory windshield washer system installed in it at one time. I still have mine bottle and holder, I wish I could find...
No problem! Seeing working on yours gets my ass into the garage to keep on mine!
Cool, let me know if you get it!
It also looks like you still have the pedal arm attached. I think you need to pull the arm off first. Hope this helps.
This bracket needs to come out together with the master cylinder
I think once you remove the pedal arm, you should be able to pull it down as an assembly.
Sorry, got called away as soon as I made it home, I'll check it first thing tomorrow
Hey Brent, I have mine currently out. I'll look at it when I get home. I seem to remember that once you have the bolts holding the master to the...
Hey Pete - good luck in Yuma. Sorry we did not get to meet up. Maybe when you come back?
I know you posted some updates on Facebook but I jumped off that boat. Post some updates on here!
Separate names with a comma.