The Jalopy Journal
Any ideas what tire sizes will fit inside the front and rear wheel wells of a 35 Chevy?
I understand that chevy made two different styles of 283 block.
What are the differences, and how can I tell them apart?
Where can I get parts to rebuild an F100 steering box?
On the top of the engine twords the back behind the hole for the distributor is an extra hole.
Is that for a down draft tube?
If this is the...
Looking for a good automotive machine shop in south Jersey to do work on my 283 block and heads. I would prefer one that can do magnaflux and has...
Anyone know who makes this exhaust manifold for a SBC. It fits high and tight and dumps the exhaust in the front.
Has anyone used these for a cross steering setup?
I was thinking of using them on my 35 Chevy.
I cant find front shackles for my 35 Chevy Standard.
tried the Filling Station and was told they are unavailable.
These are the types that have...
Flying west for the GNRS with the wife.
We arrive on Thursday night and will be staying at the Doubletree in Claremont.
Plan on attending on...
I will be flying West for the GNRS and need hotel advice.
My wife will be with me so I thought I would spring for some place nice.
We will have...
I know copper brake and fuel lines are a no no. I did a HAMB search and some said there were copper plated steel lines available.
Below are pics of the frame on my 35 chevy. I set the engine and trans in the frame an I need to rework the X member
The problem is the center...
Last year there was a great tech thread on smoothing an engine block and painting
I have searched for an hour but cant find it.
Think of chopping my 35 Chevy 2 door sedan
Any tips, tricks, pics, advice?
I need to change the pinion yoke on my chevy 10 bolt rear. The old yoke and seal have been removed but I cant figure out a way to remeve the...
Any ideas what these tail lights are from
I need to put a pinion yoke on my 10 bolt rear below is a pic of what is on there now
after doing a bit of research it seems that some people...
I am a rear from an S10 for my 35 Chevy project.
The rear currently has a double U-Joint.
Should I keep it, or opt for a single U-Joint?...
I picked this up the other day and cant find much info on it. It came out of a V6 s10
My thought was to put it behind a SBC in my 35 Chevy...
For those of you who Get HDNET tv tonight at 10:00 est
Classic American Cars of Cuba
Should be interesting
Looking to have my frame blasted
Can anyone recomend a good sand blaster in the Burlington New Jersey area.
Like alot of folks on the Hamb I love reading threads about builds
Now to the question is there a way to list threads by prefx
It would be kewl it each thread had the thread start date in place of the last reply date. Since the threads are arranged in last post...
I have a 1963 Chevy rear (Hotchkis style) and I'm looking for a place to purchase complete drum brakes. From backing plates out.
I see places like...
Looking guidence for dropping the axle on my 35 Chevy Sedan.
How much to drop?
Steering box used?
16th annual East Coast Boardwalk National Car Show
Wildwood, New Jersey
May 8-11, 2008
On the Boardwalk and at the Wildwoods Convention...
I need help
I'm looking for the rear axle bearing retainers for a 1963 Chevy II
these are the flat plates that bolt onto the ends of the...
How does one know if their engine is internally or externally balanced when choosing a flexplate
What are C-clip axles?
Thanks , Gary
Separate names with a comma.