The Jalopy Journal
Maybe it's easier to see the difference between the 2 pumps like this :
I put a 3mm (1/8") sheet metal under the new one, now it lines...
Yes, that's right but on a french flat, the fan is too far away forward and there is no room to use it. It is litterally in the radiator.
Yes, I'm pretty sure there is an oil slinger.
The machined groove is directly on my crank pulley.
I bought an offenhauser one piece oil seal to...
Thank you all for your replies.
I don't want to damage the pumps. They are brand new and very long time for delivery (ordered begin December and...
Hi, my plan is to put a french flat in my original '32 chassis, using '32 engine mounts.
No worry about firewall, my question is about the...
Hi. I’ve an issue with my rear spreader bar.
Did it myself with a tube with an o.d. of little bit less than 2’’.
The bar touch the gas tank (repo...
I’m looking for a cam to convert a french flat to a 59 ab style.
I’m running stock valves and springs, stock 59a intake and single carb....
Yes please, it could be interesting for everybody.
Yes, absolutly !
As you'll using an original transmission, you'll need a late 32 clutch release arm, or the steady rod will interfer with the...
The 'anti chatter rods' or 'steady rods' are used in combination with a torque tube.
On an open drive, they are useless.
Why ? To make it simple,...
Thanks big duece.
I’ll drill and tap the front of the block to use the original 32 mounts.
I continue this thread about the mods.
I finally got the cam out of the 59a. It isn’t in a good shape to be re usable.
The plan to convert the...
Hi Hotrodswe, what’s up with your engine ?
Can we have some news ?
Hi, my project is to put a 239 french flat in a 1932 stock chassis, so I've some questions.
#1 I'll use the original engine mounts. But on a...
Thx Aaron. Very interesting.
So backlash is measured on the splines and not on the ring gear.
I’ve watched all the vids and all the threads I could find.
But unfortunately they never show how to set a backlash or pinion...
Hi, I'm rebuilding the banjo of my 1932 Ford.
It's an early model, like a Model A.
I need info's from guys who did it yet.
I followed Tom Endy's...
Can someone tell me how to check backlash on an early ´32 banjo ?
Can’t find answer in the Vern book or on Santaanita’s rebuild tech.
I sold my fordor body for 900€, very rusty
The chassis of your Tudor in pic became a fiber roadster in Normandy.
Look @ Didier Sauvage on...
which body ?
I’m looking for parts for my brake adjuster...
Do you still have them fitted on your car ?
Oui, je parle français. est-ce vous qui avez construit le 32 de Stephan Szantai ?
I'm looking for parts, worm gear and the spring or a complete right unit
I know that :-) my question is, have you seen that on another car ?
Hi, does someone have seen this manual adjuster before ?
My 1932 made in France Ford is equipped of this particular system.
Separate names with a comma.