The Jalopy Journal
That's right!
only 75mph on the sand. But for a 1st run, with full stock militaty french flat, a bad rear end ratio and closed in a full hand made coffin........
no news! just a few picsof my lakester a Pendine this summer [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
the bad news of this event season! [IMG] [IMG] the season is ending. so I fix it this month [IMG] [IMG] [IMG] it's ok! [IMG] ready...
no, sorry! no up-date for the moment.... I will soon be back on this project. ;-)
It's an HEI distributor hidden in a "look a like" magneto.
Hi, Can you give me your feed back about the Joe hunt magnetos, please? On my 28 hemi powered roadster, I've an internal coil faillure this...
yes! all TIG welded.
I weld a plug in the hole, and after I drill it with the hole saw ;-)
thanks!
A little more work on the 35. near than 30inch are deleted from the top! [IMG] 1st try [IMG] the profil line is good, but not the front...
some new pics soon!!! thanks for all the positive feedback ;-)
I'm sorry for that! Is that better here?: http://www.rods-customs.com/forum/viewtopic.php?f=36&t=18421 or here, for the Facebook member:...
thanks! Fucking pics hoster!!!!
sorry! I don't understand what happen with the pics! I can't see them, now!
really? that works here!
I start the modification with the rear main belt line and rear glass. I must move it upper, to fit the 5w line [IMG] cut on the line.... [IMG]...
about 1 1/2 year ago, bought in center of France, a 35 nice and solid fordor, barn-find, one owner, forgotten since 1962. the car is equiped of...
thanks! this project is finish for me. When I will havenews of it, I will share it here, for sure.... I will soon open a new thread for my own...
Realy nice project!
Thanks! this is the end of this project for me. The owner will finish it alone.
thanks! You are welcome to ;-)
thanks you all !
and some fresh pics, from Etienne Empire32 [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img]...
here is the last up-date of the project. a little flash-back on the build [img] [img] [img] [img] [img] [img] [img] [img] [img] [img]...
nice build!
Thanks Tinmann! I will start a "rusty repair job" on a friend's Ford 52. And I hope begin my 35 coupe project soon, but the days are too short!!!
Thanks!
some progress on this project! I have a tudor right door, I work on the window opening to fit to the 3w line, and I build a hand mde new one for...
Thanks Chris! If you arn't too busy, you are welcome to my home !
Separate names with a comma.