The Jalopy Journal
[ATTACH]
[ATTACH] [ATTACH] nice original condition, no pits, will paint up nicely.
mount your banger motor anywhere. [ATTACH]
[ATTACH] things are looking up, just picked up this lil sedan. super solid, banger (that turns), pretty well stock. i wanna build the hot rod my...
you fellas know of anyone selling stitched seat covers or kits for a 1930 tudor. everything I've seen is a whole interior kit for $1300-$1600. i...
i picked this up and have no idea what it's from. was sitting on an old drag car chassis, it reads T13481FC. it's froze up, but if it's worth...
anyone registered there cars with year of manufacture plates. what's the scoop. i talked to the state, and they said there's a waiver you need...
anyone use 'em? i have a weiand manifold and i want my carbs to sit flat, the manifold leaves them angled forward. i'm guessing 3-5 degrees. if i...
i've been breaking in my 283, got about 400 miles on it and at 45 miles an hour clack, clack, clack. i cut it off quick and rolled to the side of...
got my motor dialed in and took my A round the block today. i'm hearing a constant whistle,i thought it was the belt at first,upon further...
finally got the leaks worked out, i have about 4 pounds of fuel pressure. the carb has been rebuild twice, the first time the float was sticking....
the clutch in my model A has always been a bear to push in. just getting a new motor and muncie 4 speed dialed in, and the clutch is till hard as...
i've got the pump that screws together,but it's not marked for an inlet or outlet. its apart as i need to clock it back to clear a hurst mount....
who's got info on these mechanical brakes. i'm trying to put together a wide five set up. are the actuators available, i see wheel cylinders...
I've notice some model T speedsters with the spring perches flipped to lower the front. what happens then? is there some kind of double shackle...
been messing around trying to gas weld, but can't seem to get it to stick. one side looks to burn in, but the other breaks easily. been using a 0...
wanting to change the pinion seal and diff. gasket in a shoebox ford rear end. i pulled the nut and yoke then removed the nuts to the diff...
all i really see is the crimp/feral type. i'm setting up my ebrake and looking for some options. can cable be brazed? how are u guys joining or...
I'm running 41-47 plymouth 16" wheels (7.50 tires) on the back of my model A. problem is one is 4 1/2" wide the other is 4" is this gonna cause me...
was wondering what kind of horsepower i could expect to the rear wheels from the 283 i'm putting together. 1964 block, 1.74 intake valves(2brl...
i have a 283 with rams horn manifolds and lookin' for the correct retainer/hold downs to run wires under exhaust manifolds. what do they look...
hello hambers, its getting a bit cold up here in new hampshire, but that only means less driving and more building. im bud garo a tattoo guy by...
Separate names with a comma.
The Jalopy Journal