The Jalopy Journal
So, what’s up with the rules,
‘68 Plymouth videos OK,
but ‘69 Camaro video
you delete ?
when Sox drove Chevrolets
Didn’t know this. Ordered 2 off eBay,
have no idea which I’m getting.
Has car always done this ?
Long water pump ?
High flow water pump ?
Do you have aluminum heads ?
Where is your timing, vacuum Advance hooked to...
If there is a takeaway for me
from this thread it is,
“A lean LSAB set up can
make it difficult for carb
to transition to high speed”
Thanks All. !
Of course !
I would like to cut possibly 3/8” off 1/2” male pipe fitting so it fits neater as manifold plug.
Is taper on male or female side or both ? If...
To clear roller rockers and stud girdles?
You can buy valve cover extensions I 1/2 and 1”
Can’t find a way to
edit poll to include
chrome stamped SBC
Most carb issues
are best corrected
[ATTACH] [ATTACH] Having to use tall really limits my options. Fortunately, found these. Proud of the ARP bullet head studs (and so is ARP !).
Very cool, and great deal. !
Nuttin’ wrong w/these. I knew I’d miss at least one option.
If this morphs into “Show Yer SBC
Valve Covers”, fine by me.
Title says it all,
“What’s your favorite SBC Valve Covers ?”
Z 11 intakes, waterpumps
H-M Cam Card,[ATTACH][ATTACH]
Well, certainly makes sense. Instructions dumbed down
to lowest level user !
My vacuum gauge looks
like #’s 2 or 3 in video.
Steadies around 1800 or so.
I don’t think I can post video of my vacuum gauge in...
Went from 73>70 LSAB ,
I believe this improved response.
Believe you stated too lean air bleeds
could hamper transition off idle...
Not to mention
higher tax brackets !
From Quick Fuel,
“ Regardless if you have a two- or four-corner idle adjustment on your QFT™ carb, start by setting all of the idle adjustment...
Can y’all get all 4 idle screws at
exactly the same spot ?
I can’t. Seems I have differences of
This is a dual plane intake and 2”...
No other pics to post as I have 0 interest in offending seller or new owner by posting a definitive ID.
I certainly never called seller to axe...
“J Comp , IFR's control the amount of fuel in the mixture ,IAB's control the amount of air , but they also control the system timing ( how soon...
Are idle air bleeds to
adjust air to fuel ratio ?
What do IFR’s, 2 small holes in each metering block do ?
I have never been able to get much...
[ATTACH] Timing is 25-26 idle, 35-36 all in at 1800.
Full vacuum Advance.
“Generally , you can cover up a stumble with accelerator pump cams or...
You read my mind !
Separate names with a comma.