The Jalopy Journal
Larry Dennis Company
6121 Midway Road
Ft. Worth, Tx.
The guys who are always at Goodguys with seats.
Bought awesome new bench...
Update July 2014---------
Got truck back from paint in Jan.
So the second pic. would be right? Seems odd, but that's why I'm asking.
Timing Cover Crank Seal-----241 Dodge Hemi.
Would appreciate info. on correct installation, totally different from original but was in 241 gasket...
85 Jag. IFS & IRS
241 Red Ram Hemi./ 700R / 354 gears.
In for Bodywork & Paint now. Jet Black II
Here's my 60 Ply Aero.
This is my mount to the frame, using stock water pump. Also went with trans. adapter with mounting ears.[ATTACH]
46 Dodge Pickup Build-241 Hemi Powered - on this site.
All Jag. IFS&IRS., 700R-3.54 gears.
Here's pics. of removing lower control arm. Torch out rubber (outside), drill 2" holes on bottom side and heat up and remove.
All my info.and...
241 Red Ram was my choice.
IRS install pics. and front sump has about 4-5" of clearance from steering.
Have detailed pics. of everything, including...
Update (12-13-12). Tonnaeu cover in place-need to fab. 1" Alumn. sq. tube for frame,then install arms to support.
Installin the Hemi ( or stuffing...
Update on the build----
Been busy finishing the spare tire carrier that is under the wood floor. The 4 boards in the middle will hinge and lift to...
[ATTACH]46 Dodge----fixin to stuff in the 241 Dodge Hemi., 700R,354 gears.
Jag. Wires (Dayton)
K&K in Graham, Tx.
Used to be able to stroll thru but not any more. Insurance won"t allow.
Can call about cars and parts. Can't remember web....
Carb is Stromberg WW 2B. Looks alot like mine (before&after), mighty cool car.
Not for sure what the 3.54 came off of, didn"t think to ask but I will. John said he had been collecting for years and all of the parts came from...
Just thought I"d let everybody know I've finally got my 3.54 gears--------Bought everything to rebuild IFS&IRS plus gears and e-type coilovers...
Ok so I finally got IFS installed, working on outside Visor, chasing parts down from all over the place. Located the 3.54 gears for IRS and picked...
10-1/2 for level lower arms, 11 for level halfshafts.
Anybody out there have any 354 or 377 gears for 79-87 Jags?
Need some now!
Would like input on 3 duece & 2 duece complete setups. What carbs for street daily driver, also who to deal with? (241 Red Ram Hemi)
Good build thread-----------
Question here -- I'm also doing Jag IFS&IRS swap on 46 Dodge Pickup/241 Red Ram Hemi/ 150 H.P. Looking on info to...
Working on the IFS now.
Pulled the IFS back out to remove the springs, all that I've read said you ought to do this first since I will not be able...
Here's one I built & sold.
Sitting on S-10--4.3L V-6.
2 sets of running boards made into one.
Took 4" from front of bed.
Finished the install on IRS last night, about a week longer than I had expected but happy on the final look. Ended up having to extend the temp....
Go to 39-47 Dodge site, they will tell you anything you want to know.
That's what I did-- Where it was built, year, model.
Search for my...
Gettin my Dodge on down with Jag IRS&IFS, full bed.
Thinking about air bags now.
Could have dropped another 2".
Check out my 46 Dodge pickup build on HAMB.
All Jag. 79-86 XJ6.
IFS can be bought for $100 or $200.
Only thing to work out is rear steer.
Separate names with a comma.