The Jalopy Journal
guys with a t-bucket,how did you run your emergency brake cables ?
What E brake handle are you using ?
Space is limited so where did you put your brake peddle and gas peddle?
Take a look @ performance on line.
I bought there disc brake kits for the front and rear.
Good customer support.
It's cold and no heat in the garage so I was wondering where do I stand $$$$$ wise.
Summit $ 2,214.47
Speedway $ 2,071.07
All others $ 7,878.28...
I have a sbc, with a Edelbrock dual quad manifold , Offenhause ram induction adapters and a TH 350 trans.
Because of the ram adapters I cant fit a...
Johnnie Blue Label.........Do you have any Grey Poupon?
I am using one on my project....
I am getting close to taking my home built roadster pick up for the Washington state inspection.
Any advice , any horror stories ?
I will be getting a TH 350 and torque converter from a friend.
He does not know what the stall speed is.
Can I tell by looking at the convertor...
There was a article in the August 1985 Hot Rod about a Hilborn injected Chevette
on the street.
September 1986 Pat Ganahl wrote about a Dodge...
#1 on the bucket list.
Taylor Bay Wa to Spokane, turn south on 395 to Calif hiway 10,then to Malibu and the Rock Store.
Take PCH 1 and 101 to...
I am installing a th350 today and need to know how much atf to put in the converter and pan.
I have read 1-3 qt in the converter and 7 qt in the...
Racing at the "vineyards" (wine vineyards) in Guasti ,now it is part of the Ontario airport.
Also south Ontario on...
I am installing a fuel pressure gauge.
Do I mount it after the pressure regulator and since I'm running dual quads ,do I need 2 gauges?
How much tubing verses rubber hose did you use?
Tubing from the tank to a filter to the pump then to the regulator then to the engine?
Where can I...
Thanks for the information,gets me going in the right direction.
I am in need of a electric fuel pump.The prices on e-bay are all over the place,from $15 to over $130.
I remember there use to be "pushers and...
C & W Pomona calif
What are you guys using for a steering box,other than Vega / corvair in your T-bucket.
I bought 20 studs ( sum-910106) from Summit ,this is before I knew to measure the knurl part. I need to call them to see what will work.
The hole is .500.
The studs from Summit are .549 .565 .589 and up to .685.
The .549 looks to be to big since the one I took out is .519.
It's my first time changing wheel studs .The rear end is a 12 bolt chevy and the stock studs came out easy about 5-6 hits with a hammer.
I used two brake drums from a peterbilt truck.
One holds a 16 speed drill press,the other holds a vice and a bench grinder.
Thanks for your response,I was about giving up that any one would say anything.
Do you have any pictures of your project?
I know what you...
up dated photo bucket.
The Rock Store,above Malibu.
Cars and bikes,Jay Leno go's there a lot.
Google "The Rock Store"
Separate names with a comma.