The Jalopy Journal
speedway? http://www.speedwaymotors.com/Shop/Street-Rod-Interior-Door-Handle-Assemblies/15.html Dave L.
here is link: http://www.mikes-afordable.com/product/AM712.html
I installed a popper on the doors, use a key fob to open, and a hidden safety latch (just in case). I am thinking the rear tires are a bit wide,...
where to find that bellhousing, looked all over. seems they dont make em anymore. Dave
[ATTACH] [ATTACH]
Thanks!
Well i started this thread in (wow) 2007, well finally got the most of the car done...still need upholstery. I know some of it is not in...
found this it may help: [IMG] Dave L
had the same problem a while back, went to the local library and they had the old motor manuals and i was able to look it up and make copies....
I have a 1959 Olds 371 motor for sale: http://www.jalopyjournal.com/forum/showthread.php?p=9600848#post9600848 just saying.. Dave L
well done all, and a special thanks to the sponsors!
get off the comp and back in the garage!
Welcome from Idaho. Dave L
There should be some screws at the top on the side, remove the screws, remove top part of windshield, by lifting that part up and away from the...
Looking good!
couple pics of mine, self tapping screws, figure it will be covered by carpet. [IMG] [IMG] Hope it helps, Dave L
Ditto!
ran across this one on the net... [IMG] Dave L
instead of arbitrarily stating use the search function, i have provided the link....
great info thanks, so if i get a T5 after 94 I can run an elect speedo gauge, and prior convert or run manual? Thanks, Dave L
I too am looking for a T5, please school me on the excessive cost to convert to electric. Don't mean to hijack thread... Thanks, Dave L
internet search came up with this: http://www.asmartauction.com/Calendar/tabid/59/ModuleID/382/ItemID/484/mctl/EventDetails/Default.aspx...
I dont know if this will help, but here ya go: http://www.qualityengineeredcomponents.com/?page_id=361 Dave L
Voted
http://www.jalopyjournal.com/forum/showthread.php?t=118764 search result Dave L
my take: [IMG] Dave L
here is the link to their web site, prices are listed http://www.metalworksclassics.com/ or here: http://www.metaldipping.com/ hope this...
been doing research on the hemi, its a dodge 331. plan on using it for the power plant.
Just got my Dodge Cab back from the dippers. I was just going to sandblast it, but once i looked in the pillars and saw all the Caterpillar hair...
Wow, Cool! right in our back yard.
Separate names with a comma.