The Jalopy Journal
I would expect the sender mounting bolts to be 0 to ground. Then the signal point to ground should be between 33 and 240. The fact the resistance...
The website says you should have 33ohms full and 240 ohms empty, so the gauge reading past full at 29 ohms is correct. Did you adjust the sender...
Some rough measurements, using the rear hood latch as a guide to the outside edge of the chassis rail (my car runs 351W with fenders). Approx 4.5...
Hi Scotty, I have an aluminium frame on the A-400 if you want to take a look. Looks like the top will unscrew, and then be shortened as you suggest.
From 19 to 29 March 2018 my father and I made the 2,200Km (1400mile) round trip from Canberra (ACT) to Mount Gambia (SA) for the Australian Street...
Also, if the column has an integrated hazard light switch make sure it is off as it disables the indicators. This had me chasing my tail with my...
Absolutely follow swifty's advice it is a real minefield. Even if you can prove the car was originally modified pre 1989, major upgrades done...
Thanks for sharing!
From the factory, all Belairs had the external trim as per the lower photo (different paint separation and extra stainless trim around the...
After looking at a range of options, I settled on Ron Francis.
Cool!
Would be cooler if the flashing lights were more visible!;)
Great shots Brett & Clay. The shot of the rear view mirror was particularly cool!
Thanks Jeff, Especially like the driving shots! Very cool!
Yes, around a 150 cars. Longest distance was from Detroit, GuthrieSmith drove 500 miles from near OKC and another couple brought their 34 three...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Photos from breakfast in the park [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
This years T-Shirt cars [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Spent the weekend in St Louis with The Crossmembers who hosted the Hot Rod Hundred reliability run. This was followed by a breakfast in the park...
Thanks Rick, Any other areas I should check?
Thanks, the import process mentions the requirement to ensure asbestos is removed from the vehicle (I expect proving total asbestos free will be...
Thanks, I am watching events very closely. Already have vehicle and import approval. Just looking for recommendations from those that have...
Looking for feedback on Aussie Car Imports or recommendations for other companies shipping vehicles to Sydney, Australia from the US. Thanks
Sorry, my advice was for "much modified". Non-modified cars are much easier (asbestos issues aside). Likely able to register LHD - would pay to...
Hey F1, Going through process now. You have three issues to deal with, import approval, customs then registration. You might qualify for...
Cool! Thanks for sharing.
Nice Town - Good turn out.[ATTACH] [ATTACH] [ATTACH]
Thanks, my bars can't be adjusted while connected so if they need to be under tension some other method of holding the axle position during...
Thanks redo. Mine has the bend at the rear and the adjusters at the front. I will now measure everything for square, starting with reared and...
Separate names with a comma.
The Jalopy Journal
