The Jalopy Journal
How it has worked before ?
Was this the problem ,that you describe last year,with the bad engaging clutch ?
Nice work on these "Graffe"....:D
I run the same constellation ,a 263 with the compound carburetion..,run also two single carb AA- Strombergs similar on it..
Runs very amazing .......
Each mounting have 4 bolts,2 of them are goes throu the block and 2 are goes not throu the block.
If one of them is left (if i remember right, the...
I think that not will match, Buick has every year build two new differend Trannys, one for the big 320 and one for the lil' 248.
If i remember...
these days the car is registrated and ready for the street .;)
At first with an optional Gastank in the trunk, because of the leaky...
my hop uped 263 :D
(sorry for turned movie)
my 263 ...:D
(sorry for the turned movie)
After a little break i have finished the work on the car wich will important for Tüv.
Rear shockbrackets at frame are compl. new, the ones on the...
I'm work many on the Car..after it come to Stephan, i had fixed the bend Brakelines in the rear, new Pushrod and a Boot for the Mastercyl. After...
yes, the car is here now.
It stands in the garage from stephan,he's also a lifters member.
he lives 100 miles from me , there is the...
I go with you ,Thomas.
We (Lifters Germany),buddys of Richy, are curious about what the german Tüv said, if it see the Car to legalize it for the...
I'm very curios about the Car if its arrive here .
Richy is a good Friend of mine and I'm the One who fixed his Car if anything is happen with it....
A great source for pre-war and most all Buicks up to 1949 is Dave Tacheney in Champlin MN.
His phone # is 763-427-3460.
Absolutly Awesome !!! :cool:
Thats the wrong direction,
Negative from the Coil are to the Dist and Positive on the Coil is Ignition +.
The third Wire is maybe for the Start...
I would do it too Baumi, 'would check the Water- and Gas Pump ,if it looks nesessary install a new Gasket Set include the Freeze Plugs,in every...
This one ? :
Nice Pics looks awesome ...
danke Stephan für die Bilder .
Hope next , or the year after we can enjoy it too with you all together ...
we had talked about to come to the KOC in 2014 with a handfull Members..
Wish you all a nice Weekend with a good Race and Party !!!!
Here my '38 ,I'm very alone with my fast Str.8 here in Germany (under the V 8's). It's hard to get Parts for.
That is the Salt in the Soup for...
Is it correct,a 322 ? or perhaps a 332 ? I find only 332-428 cui FE-Engines.
Congrats to the new Car.(Sorry i wasn't here for longer)
A Pheaton,nice Idea.
(For the last Time i think about what is a "Bimmer" ?? now...
I think thats the next Problem thats come to me,the hot 263 Engine will kill my original Gearbox.
I don't know what i do then,when it will...
TheCarbs looks good,it looks like that the Rust are only on the Surface.
Hope the Housings arround the Shafts are OK ? and no...
Hi Rainier,here a couple of Pictures from my car:
In the moment with the Spare Engine with the wrong Colour
Hi Rainier, congratulations for the Manifold.
You have good Carbs too ?
You will build a Linkage for that to open both Carbs together ?
i think Stephans Reason is only the low Price and to save Money :D:D
Nooo Miguel,we are not tired for BBQ every sunny Day after Work.
Separate names with a comma.