The Jalopy Journal
I have been following your build for a while.
I would like to get a copy of your current rules,please.
Jr Clark (CrkInsp)...
More info on EWP please.
What is the extra water pump?
Have we made any noise yet?
How about an update pls.
We have a some what modified 450. Here’s a picture.[ATTACH]
It’s still being “massaged”. Hope to get a little more out of.
Sent from my iPhone...
What carb are you using?
Yes, two left side headers are the basis for a nice setup for the I6 Chevy.
Yes , i know about them. I contacted them about one like the ultralight for the 9in. They just referred me to the standard 8 in., but it’s almost...
Has anybody made a 9in spool fit an 8in ford?
Have you guys dropped off the earth? Haven’t heard from you for a while.
The last set of rules I can find for the NW/Vr's is this.
Working on obtaining prints to post. Also head gaskets to stack for comparisons.
Take a look at the LS heads. Bolt placement is a lot better.
Working with a 302 GMC. Would like to know what gasket you are using. This motor has a bore of
4.155 and a stroke of 4.200. We are having sealing...
The 52 in track can be achieved using a stock width housing and different back spaced wheels. That number was chosen when we were ask "how narrow...
Most of the SDRA cars are using 8" Ford rear ends with 28 spline stock axles and a 52" min track. We are all auto trans. The biggest problem with...
Name and contact for the "Diaper man" pls.
I get ask frequently if the SDRA has a blue print for our chassis. I think it would be a
good idea if some one would draw one up as an example to...
I have two questions:
1. How wide is your frame, lower rails?
2. How far out do you have the fire wall (axle Cl to fire wall)?
We ran a stock 4.0 jeep motor in an SDRA car at Tulsa this year. the only changes were a set
of after market headers (like the factory ones). A...
How about a little info on your chassis. Wheel base, engine location, weight of chassis.
If that doesn't fix the problem, you'll just have to quit tipping the can as far.LOL
There is not a cross hole in the rear bearing.
The lifters are not dumbbell.
That rectangle on the back has confused a lot of people.
Ok, what are the rules?
well it looks like it could be Chry, by the lifters.
I am looking for info on a Wolverine cam. I have a cam # 38-0975 with lifters. I haven't been able to locate anything on this cam. All I know...
Ok, now I know a little about getting old. I miss placed my notes. Can someone please tell me what the compressed thickness of a Felpro head...
What happened to the pictures? If all else fails, go to Facebook.com/SDRAtulsa.
Separate names with a comma.