The Jalopy Journal
I've been in the auto restoration for about 35 years and use P/A often. I just did a 40 ford sedan roof that had heavy surface rust. What I do is...
they are usually at the Portland or. swap meet and will have 2 or 3 booths set up, this will be in April. I'll be their if you guys want to put...
SELL? Portland swap meet first part of April Jay D.
55 Buick in 1965 passed. m/c endorsement in 1969 instructor said start the bike, use the left turn signal, use the right turn signal, step on the...
NICE old buick ! do you still have the oem running gear in it. Jay D
thanks rusty1that looks about like mine yours is maybe bent more, hard to really tell. I sent an email to Sids and they said that they should be...
just bought a 49 chevy pickup front axle to put in my gmc powered 31 chevy pickup. my question is when I look down at the axle its slightly curved...
its a 270 jimmy fairly easy to install and you probably won't see many like it
the king pins are different sizes SIDS will list the dia. of them. I was going to do the same thing so I could have hyd brakes. but now i'm just...
I don't care what they say that's a cool picture
i'm putting a 270 GMC in a 31 chevy pickup and just scored an early Camaro W/C close ratio t5 for 200.00. For the speedo i'm not screwing with it...
those guys use to have a tool for doing the line up that they would loan you with deposit. check with larrow and sons in Sandy Oregon, I used...
who did you get the adapter plate from ? its got to be right on or you'll screw up the pump
Walter Zip Cut wheels they my cost a little more but they last twice as long
I don't know if you can still get it but BARS LEAK or SILVER SEAL will probably do the job. I had one just like yours only the full length of the...
did you pull all of the lifters? you should check all your valves to make sure that they are opening all the way, you could have a cam lobe going...
there are quite a few A's here and I have a near stock 31 chevy pickup that's going to be my daily driver soon. the old car and drive it its kind...
that rear glass may be a problem but I think its the same as a station wagon or panel. were are you located if your not to far I think I my have...
I do as above but be sure to use a guide coat
if your talking to holes in the inner wheel well they where most likely used for assembly line up there not good for anything else
haha, don't feel like the lone ranger ! i've got the same set up as you:o
all you need to do is get an aftermarket rear end plate with hi speed sealed bearings. then do the same with seals on the front stock plate. you...
[IMG] 471 on a 270 GM[IMG]C
[IMG][IMG] [IMG] my 270 JIMMY
now thats cool i, like to see a vintage engine with some speed equipment on it
i just got a 31 chevy pickup about a month ago its going to be a driver with a 235 and a t5 trans. i want to change it to hyd brakes and picked up...
thanks agin guys, lots of GOOD info jay d
thanks james, i'm on it :)
i just got a 31 chevy 1/2 ton pickup and i want to do a 235 and a t-5 trans ( s-10 ) has anyone done this ? i have a 235 out of a 54 pickup i want...
Separate names with a comma.
The Jalopy Journal
