The Jalopy Journal
Anybody remember the 1/2 mile drags that they held on the back stretch at Riverside Raceway?
I remember him running a Sportsman car in the early 70s.
Will this work? http://www.tanksinc.com/index.cfm/page/ptype=results/Category_ID=70/home_id=59/mode=cat/cat70.htm
I'd like tho thank my wife for leaving 9 years ago.
I think I would really like to own another '39 Ford Standard like I had as a kid eons ago.
Second choice would be the DeLorian rotting a...
This one? http://www.sbrhs.org/
Oh I see he posted this link already...sorry but here it is again
I saved your address and the next time I get a 2 for 1 subscription offer ill have one sent to you.
Niki, It sounds as if it's loading up. I'd advise you to rebuild or replace that carb, replace the fuel filter and recheck the timing. .....Bob
Capping them could only make them stronger.
Truckers priorities at truck stops:#1. Parking, #2. Waitresses , #3.Food
And least we forget the clothes pins on the fuel line to prevent vapor lock and also moth balls in the gas tank for more pep.
Here you go brother: http://youtube.com/watch?v=7x68ZHe0hM4
Thanks for the post, Ryan, I clearly remember listening to the races, back then, on the radio (No TV). The mix of engines then made the race much...
Yep it was called "THE WAR WAGON" was a funny car and about as aerodynamic as a brick but it had style.
I don't believe Nevada cares where the car came from as long as you have proof of ownership and register it in a timely manner
Things must have changed. We had a nickle stripper when I worked for a plater way back in the dark ages. As far as I know chrome plating can and...
A 2-stroke diesel would runaway when you run out of fuel with it. You had to shut off the air supply and they were equiped with a butterfly valve...
They won't reach on the stock heads either. I trimmed up the heads with my Dremmel tool.
Putty knife, wood chisel, crowbar, dinamite, nuclear device. Worked for me
The wheel bolts are swedged on. Unless you have a special cutter you'll be best to cut/drill/grind the heads off from inside the drum and poke...
What is the advantage of a reverse flow engine?
Flip the spring around and see if it leans to the right; if so return the spring.
I believe that there is a seal in the tube. Probably needs replacing
I stopped looking. A women can be rented not too far from here if need be (legally). A live-in isn't worth the aggravation and they both cost...
Then they replaced the bleach with gasoline and did the firey burnouts which didn't last long.
While its running attach a volt meter to the large terminal on the rear of the alternator and ground the minus lead from the meter(probably black...
Are you using a 6 point socket? That helps with the fit. Otherwise keep PB plasting and tapping taking occational brakes to look up new cuss...
Separate names with a comma.