The Jalopy Journal
Yeah I meant the bolt that goes up through the cushion into the upper part of the mount. That chassis engineering mount looks pretty slick....
Also, I ran that nut on the pitman arm shaft up on there so tight that I destroyed the nut and had to buy a new one. thats as far as that pitman...
I don't want to move the box up any more because the motor mounts I made bolt in through the bottom. Right now the drag link is pretty close to...
I am trying to get my steering together, but nothing is lining up like it's supposed to. First of all I put my motor mounts right where the vega...
The suspension is a dropped I beam axle P&Js setup. I was told that I should just put the pitman arm on the box and use the nut with an air wrench...
This is my first true build, I have been working on it forever because of life and I have to research every step. Any way, I'm just trying to...
Welcome from the western slope.
On my 331 I just went the easy route and ordered a rebuild kit from hot heads, but I upgraded the camshaft and upgraded the pistons to the custom...
RIP hemi46
I went to Perth when I was in the Navy and if I remember right the aussie diet that I was on consisted mostly of Victoria bitter.
Second that every one of my hinge screws were solid I just bought some cheap ass wal mart steel nuts and welded them on through the center. The...
My coupe which I'm pretty sure has the same dimensions is about 40" where the seat sits and the frame rails are about 2 feet apart where the motor...
70S6 is all position but it's a hell of a lot easier to run it downhill. And can still get good penetration even on thicker material.
Skirv that would be awesome if you could get those measurements, I don't have the radiator yet either, I am sure I could call walker and get the...
Thanks for the info man, I know I've checked out your coupe before on here that is a thing of beauty for sure. Did you do all of the fab work...
Looking killer man your dad should be proud he did some pretty nice work on that trans tunnel.
So my 331 is in the machine shop right now getting the full treatment but I have this 354 block that I bolted to my T5 via a wilcap adapter kit. I...
The tag is stamped E6ZR-7003-FB 13-42-169 from what I can find online this is a world class T5 from 86 1/2 to 89' mustang 5.0 so it is an...
I was going to fab my own trans crossmember anyway I guess I'll just have to make a funky lookin one. The engine that is going in the car is a 55'...
There isn't an entire wall of trailer-hitch testicles. Man those things are dumb.
For a dirtbag you sure have a clean car man that thing is sweet.
/\ Whatever old bug's and vans are badass but you will probably get flamed if you post pics on here.
So I did a search and found a thread that talked about the camaro and firebird T5's having a tilt to the drivers side. And some of you said that...
If he was losing his shielding gas it would be chock full of porosity. Looks like you just need a little more amperage.
Yeah I was thinking that if I put a strap of aluminum on top of the spring like Saxon said it would give me a little more travel. I dont think I'm...
Well, had to weld 3/8" spacers on top of the 1/4" spacers that were there from posies but I finally got the spring tightened up. Now I am looking...
Hey fellas, quick question... I got a new posies super slide rear spring for my 30' coupe, and seated it up in the pocket of the rear crossmember...
Welcome from western Colorado.
Separate names with a comma.
The Jalopy Journal
