The Jalopy Journal
clean Model A frame with all crossmembers and VIN. Straight, not molested.
I don't know how heavy your car is, but on a model A with a sbc they stop just fine, you can lock it up no problem if you had to with out a...
Awsome pics, I had to subscribe, bitchen cars.
I have a steel P-38 fuel tank, has some dents but overall the nose and tail are in great shape. I want to sell but search results have found no...
Weather in the 80's? I hate you guys.
How many cars turned out last year?
Same thing happen to me a while back on a 2g. Turned out to be a stuck needle and seat.
Miguel, I'm so sorry. We'll keep you guys and his family in our prayers.
Cliff...really? Get out into the garage and weld something. I'm gonna go piss off now.
I have hotrodidus as well.....It's a illness, it keeps me awake at night.
Will my chrome turn out nicer if I polish the bare metal first?
Mid 70's Lincoln Versailles had factory discs, and I believe they were 28 spline.
I worked in Desert Center for 7 years at the Cal Fire station. Now Rodger didn't like the fire dept. but he saw me drive a couple different hot...
part for the look, part because I have found a guy that sais he has some older blower intakes. I would really like the oil fill tube so I can run...
forgive my ignorance, but even if it has no thermostat provisions, I can run heater hoses off the water pump and use a remote thermostat, allowing...
Anyone have pics of a early intake with remote thermostat?
That's what I was afraid of.
Blowers are new to me, looking for some schooling here. I got a old GMC 6-71 convereted to gas use. I would like to put it on a sbc. Does such a...
Wow, you beat me to it. Searching for a intake, gears, and end plates now.
Mine is a bit different. I was going to restore it to stock, but found very little info on this model. Also needed a computer and found only one...
That's neat you got 2 that match. It would be cool if you built a island with a air meter, old overhead light, etc like an old filling station.
Redrill and tap new set screw holes in the scoops. Pics of the linkage would be helpfull. Oh, and do a intro before someone slams you.
You are required to SIGNAL, not have turn signals. Your left arm will sufice.
Is it scary, or just slightly less stopping power. I'm talking about drilled front backing plates for drums. Any experiences?
I had a few pitman arms, so rather than grinding down splineson the sector, I split the 4 fat ones in half with a hack saw and tri-angle file on...
First off I spent hours using the search function with no luck.
I'm using a F1 steering box in a '32 frame. I cut off and redid the flange per the...
Roundvalley, thanks for the pics, that's what my setup looks like as well.
So wouldn't de-arching require a wider perch width?
Can anyone provide pics of their set up? Bass I don't know how yours is so low. Almost flat like. Mine has a much bigger arch.
So STRECHING the spring like what is done on a Model A rear spring in NOT required?
Separate names with a comma.