The Jalopy Journal
Craftsman 12x36 metal lathe
Has quick change gearbox
Upgraded quick change tool post with $1000 in tooling included.
New 110v motor and belt....
Registration good till 2018 and has good texas title.
1950 ford sedan (shoebox) roller
Set up for 350 firewall notched for overdrive trans.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
1928 Roadster all henry steel (will need lower patch panels)
Good running banger, new...
Are you running factory hydraulic roller lifters or link bar aftermarket lifters ?
If you are running factory roller lifters you must use a...
Maybe so you can have a place to park your trailer, or maybe so you can visit your daughter while in town..
Use a Ballast resistor or just get a 12v coil ? Also what effect with the 12v have on the stock points ?
yeah it sucked.
Just look at the distance between timing chain cover and bottom of the heads 351 is 1" taller.
Looks like the Dallas Autorama is this weekend. Anybody going ??
Website shows Gene Winfeild will be there chopping cars....
My dad was a welder by trade and had to give it up due to having a defibrillator put in last year. The doctors told him no welding and no working...
302-351 dirt cheap and parts are everywhere.
What's exactly is a 302 stroker drag race engine ?
Aircraft riv-nut pullers
I don't see why you couldn't. Here is a kit made for the flathead that uses and eaton supercharger....
The boost control solenoid also provides your over boost protection.
I have ran plenty of HEATONS well over 18-20 psi. Your problem then is you...
Nope, they have a boost bypass valve.
I would find an eaton off a lightning. They have the inlet on top which would allow easier carb mounting.
What size gasket are you taking the intake up to ? 1262 ?
Dallas mustang has them pretty cheap.
Milller -end thread.
Fuel pump eccentric on the front of timing chain could of came loose hitting the timing chain cover. Pull the water pump and timing chain cover...
Any Y-block guys ?
Thinking about replacing the banger in my 28 Tudor with the 292 out of my 63 F100. I have been reading up on the y-block swap and most people...
Milbar has a pretty good manual with there pliers for those that have never safety wired
My 28 won't be ready but I will still head out there.
Mikes trick shift
Separate names with a comma.