The Jalopy Journal
Synchronizer hub to far forward and balls starting to pop out!
How do you get the hood open.
You should be able to get a coat hanger past the brake peddle from underneath the floor and work and bend it to move the inside handle to unlock...
I will have my usual boxes of fresh picked apples for all to sample.
Back to the top.
Start getting those flatties ready!
The hubcap fits the rear axle covering the small center bolts on big Ford trucks starting in 1935.
Thanks to everyone for attending the 2017 East/West Flathead Reliability Run. 6 cars showed up from the West side and 28 from the East with 7 of...
Going to be a fun project no mater which direction it heads. It would be neat to see it show up at the flathead run someday. UAA 462 , 462nd car...
The 2017 East/West Flathead Run is happening on September 23, 2017 in Monitor,Washington. Be there by noon to be counted to determine the winner....
I will be in my usual spaces 3208 and 3209 on the main aisle through hall D at the Expo.
Thank you for the photo coverage. I spent most of the event at the check in table to get an accurate count.18 for the east and 10 for the west....
Pass the news---not much time to get going.
Thee Inland Emperors were not able to schedule a flathead run this year. Because everyone enjoys this event, a few of us decided to organize one....
If the seal rides between the rivets pull the torque tube off the driveshaft and hand file the heads of the rivet so the seal can slip over it.
Only 32's had the shifter top cover with the mounts for bolting the e-brake handle to. Also 32's didn't have a square inspection plate hole in the...
Just bend the threaded stock Ford part near the eye to line things up. You might have to add some length to the rod to have enough.
Rearend looks to be a 1940.
The third car from the left looks like 28 or 29 Ford.
I hope to be there.:)
Looks like a lot of us are in building "D". I will be in stalls #3208ಉ on the end of the middle aisle as you pass through the hall. Stop by...
When someone asks me "What year is it" I just say 2015!
I will be in building D spaces 3086 and 3087. Stop by and say hi. Hambers get a free 8x11 sign for your booth or man cave while 32 of them last.
No spindle stops either.
Lincoln missing one clip. 40 to 48 type Ford hubcaps fit.
Separate names with a comma.