The Jalopy Journal
Good luck that car topper reminds me of the ones my dad rented from u haul for the annual trip to the jersey shore Sent from my SM-G950U using...
I agree with Krylon32 I’ve been running a Ford 302 in an off topic car and I am very please with the price performance. Also it does a little drag...
In my experience 57 heap has it right. I purchased three different ones and none of them fit. Two were OEM. I finally modified an after market...
Could it be better exhaust port scavenging causing a lean condition? Sent from my iPad using The H.A.M.B. mobile app
Is the mechanical advance working or vacuum advance? I had a similar problem with 6 in my Chevy and it was the mechanical advance Sent from my...
No pics but repaired the turn signal cup on my 1953 Chevy Followed the video from a guy fixing 58 vette The setup is the same up until 62 Switches...
I’m running the pertronix 3 in my off topic car works great and the built in rev limit has saved me a few times. ;) Sent from my iPad using The...
My son and I began wiring my new garage. He gave me several lessons in conduit bending. It’s nice to see him take pride in his craftsmanship....
My son and I are in, we built a car for 2019 but he changed jobs and we had to postpone. All we need now is to win the registration game. ;)...
Just a thought have you contacted Backyard buddy and asked them? Its something that may have been asked before. Sent from my SM-G950U using The...
Went bracket racing with my son at Maple Grove Raceway Ford vs Chev off topic cars or I’d post pics The old man got him at the tree he went red...
Mart nice video and excuse this question if it’s a little obvious but are you repairing your mill or is this just to increase the size of the part...
Hey good luck with it and build it the way u want R u in southeastern pa? Sent from my iPad using The H.A.M.B. mobile app
Now if you were to repair it would you repair the existing acme thread or machine a new replacement part on a lathe? Sent from my iPad using The...
I wanted to post how I resolved this problem. The bolt is only tightened to 12 foot pounds. The gasket appears around all of the edges of the oil...
I've got an oil leak coming from the right rear oil pan bolt. It starts dripping as you see in the picture after the car runs for about 5 minutes...
Hey it looks good when I first saw it I thought it was the chev I see in Saunders Parking lot in Phoenixville PA Sent from my iPad using The...
Front Street in Philly down by the Stadiums in an ugly but fast big block chevy been hiding a VHS tape from my sons with my last drag racing...
I’m converting my 1953 Chevrolet 210 235 from 6 volt to 12 volt this winter. I know I can buy an Alternator Bracket but I’d like to make one in...
I make gaskets as well and use empty shell casings to cut out the bolt holes. Different calibers for different sizes. They make nice free...
I need to replace the side window in my 1953 Chevy sedan Does anyone have any tips on how to remove the old setting tape without damaging the...
I did this job on a 1953 Chevy just recently. Parts availability was good and I replaced the master cylinder which was the most expensive part....
Goin as well weather permitting ............[emoji12] Sent from my iPad using The H.A.M.B. mobile app
I’m running one on an off topic ford behind a stroked ford small block that displaces 347 CI. It sees regular street and strip duty without any...
Does that leave just Atco and Island Drag strips as the last two left in New Jersey? I'm still surprised that Atco is still operating with all the...
Thanks for your responses I was able to figure it out with an ohm meter. Squirrel thanks for the Brake Light hint that was a big help.
I'm trouble shooting a problem with a 1948 Pontiac turn signal switch. There are multiple connectors on it and I could really use a circuit...
Software engineer I am a Geek unlike in high school at least it pays well.... [emoji12] Sent from my iPad using H.A.M.B.
The Ford site loads quick The Garage Journal was slow about 10 seconds it resolves to 199.193.245.153 the pages load ok as you navigate the site
I'm not a member but the Chester County car club is active in our area. They have an annual car show at the Kimberton Fair grounds and it is...
Separate names with a comma.
The Jalopy Journal
