The Jalopy Journal
I have the heads off of my 8RT truck motor re-doing the valve train. I have a set of 8BA heads that I could put back on instead of the 8RT heads....
I have a set of headlights that I am not sure about what the small bulb on top is for? Parking light? The center bulb has two filements. High...
Does anyone know a guy or a shop that can convert my 1953 F100 truck 6V generator to 12V? I am converting to 12V for other reasons and kind of...
My trany would grind going into 3ird. How does one get wear like this? [ATTACH] All 3 notches look like this. My blockers have nice square...
I have been told that there is a guy in Oklahoma that can take a stock ford I-beam front axle and drop it., so the car sets lower in front. Does...
Is gas supposed to be dripping like this? I always imagined it misting a little finer than that? [MEDIA]
I just rebuilt a Holley 94. Now it whistles until you advance the throttle. Some times it stops whistling for a while and then starts again. I...
I need some help? I have an old F1 truck 8RT that has been setting for years that I am trying to revive. I have it on an engine stand. The...
I am changing a head gasket on an 8BA and am unable to get all of the coolant out of the block, by draining the radiator. So some of my head...
Does anyone know if 1935 and 1936 radiators are the same? Sent from my iPhone using The H.A.M.B. mobile app
My friend bought this from a guy that say 35-40 car? [IMG] Sent from my iPhone using The H.A.M.B. mobile app
A friend of mine has obtained a 36 ford 1 1/2 ton truck cab with a nice grill and hood and side covers. He want to build an open wheeled hot rod...
Does anybody know of a Brake or Clutch M/C that is smaller than 1.0625? My M/C is up on the firewall so it needs to be an old design for looks....
So in theory, when you only have one u-joint instead of two, in a drive line, any mis-alignment will cause accelerations and decelerations (which...
I thought some people might enjoy looking at what I have been trying to save for the last year. The guy in the photo was the last owner. He...
Hi I am trying to build my 31 AV8 coupe like what was done in the 50's. I am using hanging pedals bolted to the firewall. Flathead with top...
Separate names with a comma.