The Jalopy Journal
Thanks for the help guys!
I am wiring a 49 F1 with a new EZ Wire 12 circuit harness. It has an add on turn signal switch on the column. I need to figure out how to use this...
Whatever...
Not exhaust! When you pull the valve cover you can feel it in the valve train as it clicks.
My engine runs great also. Just the clicking when I shut it off. I have a lot of engine experience, this is new to me.
I believe it is the valves are adjusted too tight. When the lifter loses oil pressure after the engine is shut off, the piddle valve is seating in...
Did you ever find the cause? I have a 350 doing exactly the same thing. With the valve covers off, you can feel the peck in the valve train with...
They are fresh...
I understand what they are saying but my other two carbs don't drip. I think I have an issue in the carb.
I have 3X2s on a 350 Chevy. They run great but I am having problems with the rear carb dripping at the boosters when I shut the engine off. Any...
I believe the first pass is at ShadySide Dragway in Boiling Springs, NC and the second pass is at Greer Dragway in SC.
I grew up going to Greer Dragway and live in Asheville, Nc. As a teenager Bad Company was my favorite race car. I just couldn't believe you could...
I have a Lincoln from Lowes that works great. It welds up to 3/16" just fine with a bottle of 75/25 mixed gas. I also have a Hobart handler 180...
I play the mandolin and the guitar. We do alot of bluegrass jams here.
Back in the '70s my dad built a 153 and put in his '59 Corvette! He built the mounts so it would bolt in and not destroy the car. He also ran a...
3 pedals!
US Army 1980-1987 Avionics Tech
Now in NC if you bring a car from out of state that is 35 years old or older, it has to be inspected before you can title it. They are doing it...
Thats the way my '56 looks now!
It is easy to find a pumpkin for your '55. 55 to 64 will fit
I did this to an 1LT in the Army.... I hooked a wire from the solenoid to the horn. When he would turn the key to crank the engine the horn would...
Hey Guys, I am from NC. I have a '56 Chevy and a '59 Corvette that is soon going to be a Gasser project. I worked on Cup teams as a mechanic and...
Separate names with a comma.