The Jalopy Journal
are they the cheap mr gasket straight thread style screw ins? '7/16 course bottom and 3/8 fine top" i've worked on a 57 vette 971 heads with the...
sub'ed thanks for the return of grand memories guys, if any one from jersey and island dragway remember a 54 belair named the stove bolt. i'm one...
think my 64 t-bird fits the ugly lists, "maybe it is maybe not" but it sure fast with a tri power 406 tied to it's C6 sitting where the some what...
was thinking about pappy just this week, more on how he helped me build a few pappy break proof race items, like his super strong olds/poncho...
whine from a quick change is worse then that m22.
thanks guys. even the nut busters, my starting points was my old Motors and Chilton's books first then turned to google and ask to start . as...
trying to help out a buddy and go though a BB Chevy he had laying around uncovered for 25 years. it had been rebuilt then left to 'yes" a rusted...
that crank can handle down to minus .030 and run ok. I raced a 54 with a 235 in the long gone N stock with one cut .020 x.020 and a 62 belair...
ditto here when I worked for Malcolm Konner chevy in new jersey.
early hd and hp heads used the rectangle/square single and double to indicate what they were used for. basicly this was the early form of our...
pic 1 and 2 is a early double hump fuelie .pic 3 is a later power pack [IMG]...
sounds like it is time to drop the pan and get a closer look at the bearings
that is not the number I was thinking about that one is the vin hand stamped number stamped into the block in front of the right side head it...
1960 was the change year for the valve cover bolt pattern so they should be 2 different covers ,UNLESS some did as we did in the past and nickel...
this might help a bit http://outintheshop.com/faq/casting/heads.html the one thing about those heads unless some one had welded them up as...
yes old well aged good 4 bolt cores are getting hard to find, but a 4 bolt 350 , not really if some one is willing and doesn't mind new chevy...
010 is a 350 casting which was used for both 2 and 4 bolt blocks, look on the sides of the block and by the bell housing for a casting S010 if...
lokar makes several adapters that extend the lower carb linkage ears to help properly set the cable. plus cable kits .
lucky for us we always towed to and from. duke remained to the book till last year but pushing the 80 area he was slowing down, didn't see him...
the blue one was the first of several. back then pete would bring his welding truck to island and weld up what ever you needed or fix something so...
stocker replacement for a 8 inch going on a brand new gm goodwrench 290hp 350 . a new one from the dealer went right on
there used to be days I would jump on their parts as they fit and worked. now finding these I sure won't. and just as a note we tried three of the...
chunk 40 I just went back to your first post and saw electronic ignition. might sound dumb but I just had the 454 in a buddys boat start doing...
guess i'm a real old fart here and will admit to being one, since I remember when I started working in dealer ships plugs on the old 36 and 40 hp...
we called it the stove bolt. as to duke he is pushing 80 now i'll never forget him telling the worell brothers when they protested me your...
1.2 mm works out to 18 gauge steel, here is a link to a chart to help you and others...
do you remember a white 54 chevy belair running n/stock? that was me tuning it. national record was 17.4 we got it down to 16.9. or old duke the...
just got a dorman products crank dampener for a sb chevy...
X2 off in sheets over a sand blasted frame with the frame paint type yet so many others never had a problem,.
Separate names with a comma.
The Jalopy Journal
