The Jalopy Journal
thanks II funny . john: no turbo's , the nostalgia crowd freaks the f%#k out everytime I try to race that combo, back with a little stouter...
from post 2343. 4 HRS in staging lanes? is this the norm at this event? driving 10 hrs to it, would like to get 10 passes in or break it trying.
its cool as hell. and no one else has one.
1958 dodge / 1959 dodge looks to have the same fin layout,
I have watched your threads from the start. you and your DAD , all though gone from here, should be proud of the cars life. its touched generations.
Feb 2012 avatar pic
skotz, drag some of those croonies with you from down that way for this event! we will see you there look us up. mark
hot rod, the drags are the best part, if you go make sure to arrive before 4 o'clock on Friday to watch them.
did you find your vin?
have you looked at the oil pump drive shaft to dist, if the motor overturned it could have fell off oil pump.
My 1936 IH had its # on the front left fame rail just below headlight stand. 1,5 inch tall pressed into rail. Mark
60 OG did they get tired of that car down under? See you guys if the weather is good. mark
O HELL; Not all of us that surf this spot are assholes,ie do this, do that, some live on here look at post counts that will tell you what is up....
Heller; call me about this pm'd you also. mark
WHAT THE HELL !! 56 CHEVY, and its got a boat motor too boot. I thought You didn't like doing wheelies. looks killer Dirty John, I will keep an...
The website doesn't say anything about cancellation.
These are pics my wife took: This is the thread for Friday night,...
Nice job Mike you are bad mofo 2 different cars 2 drag weeks, good luck. mark
Check at the GM LEEDS PLANT.at Manchester @71/49 hwy. lots of indoor storage , dusty as all hell but inside.
are there rv hook ups ?. is it flag start racing? thanks ,mark
x2 with engine MAN parts failure most likely( cheap shit.)
CAR LOOKS GOOD. HAMB DRAG KILLA, are YOU going on drag week? mark
Pinchecharlie; You need to make sure if You want to race the HAMB DRAGS it has to have a LS style small block in it. MARK
Sounds like you have the wrong fork, there is also two different lengths of pivot ball that the fork clips too.
look at plumbids build of a Plymouth coupe. used some flashing for pipes cheap fix at home depot
I would bet every part IVO got was new or made just for his projects. Most built by MEN that thought out of the box.
you did ask for opinions, wrong thing to do here. I started to build one similar to your stated build, ended up with a full on drag truck. Build...
Separate names with a comma.