The Jalopy Journal
That was my inspiration and dream
I was afraid someone was going to tell me that R I P Thanks
Does anyone have a email address for Bob Wingate? I have some interesting pic to share with him
Yes it is on the Corvette Forum there are some picks there I spent 3+ days with a pressure washer and a shop Vac trying to get the remains of...
Ressurecting a old rat infested B/P 64 Race car
[ATTACH] Same owner since 1965
Do any of you folks have any pics of your hood props? There must be something interesting for the butterfly hood sides on the 41 Chevys
I have some early Chevy P/car hubs and chrome backing plates that I would like for them to go to a good home No shipping pick up in Tucson N side...
Well what happened with the Corvette? Who makes " Corvette race car " bodies, or bodies to fit a Corvette chassis?
cana.jpg (134.2 KB) Download | Remove
Rejoice in Paradise Pete. Your work will live on "forever"
Following this one! I have changed washers, placed all 5 and no change Changed the outlet fitting to a different size to change GPH no change I...
My buddy died and left his finished bucket list item for his widow to liquidate He talked about building the Beismeyer flat bottom for 20 years,...
For real close work with a rattle can I have used a straw from WD-40 can if you have the right nozzle on the rattle can
The last C/S bushing we removed we used White Bread! Just find a bolt the same size (close) and keep packing with a hammer Less of a mess to clean...
Don'r forget the vacuum secondary on the Holley............... was it opening under WOT!
We have a 33 Plymouth 2 door with a 383 Mopar and are looking at radiators What are you folks using for cooling these V-8 Are there some better...
Wheel mounting axle flange, or backing plate flange?
I have been using it for over 50 years for for internal and external use on 2 stroke and 4 stroke engines, I use it in gas when storing a car for...
Wheel bearings only good for two years? What is the axle width wheel mounting to wheel mounting on a 56 2 dor 6 cyl
We have a complete drive train from a 33 Plymouth sedan with a good running engine if you would like to talk to us?
Anybody know where I can find the filler strip ( I don't know what it is called) on a 46 1/2 T grill, it is between the small upper grill and the...
If my name was Gene Kirkwood I would be at your door for that Corvette! As the owner of a C-1 & C-2 numbers cars for the past 49 years you have...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
..............Ahhh, shaving cream with Lanalin, makes a good cleaner
Build your 350 that you have and match it to the rear gear ratio, to "your speed"
AC 44 or 45 is what I use in my 327, if you have room a re- curved HEI will make a big difference with a vacuum full time
It sounds like a air pocket and you are reading steam temp
Looking for a "44 inch" hood and side curtains for this 33 Plymouth
Separate names with a comma.
The Jalopy Journal
