The Jalopy Journal
WOW! What a great weekend, when we let home on Friday it was in the low 40s, Saturday was in the high 80s! Well worth the drive, caught up with...
First time going this year, looking forward to it, gonna be bringing the Buick.
I was chasing a similar issue, ended up that the bearing spacing, the distance between the inner and outer bearings was too big and the outer...
So, I just picked up '53 Roadmaster, going to lower it, any issues with the torque tube rear end or can it take lowering?
[ATTACH] Here is mine, 6 inch kick up in the front 12 inch kickup in the rear. 4" chop and 4" channel. I drive this thing everywhere and it drives...
I've used them a lot and never had an issue, whenever I called, left a message and they got back to me. My impression is they are a small...
I charge $2 per louver, including set up as long as the part doesn't need a lot of clean up or work ahead of time.
Sent from my iPad using H.A.M.B.
I will once I have time to look at it closer, just had a few moments over lunch.
A customer dropped off about 4 boxes of magazines, among them was this book from 1971, covers pretty much everything with wheels. Has a sections...
All I'm going to say, if you are learning to weld, have someone weld this up for you. I had a customer borrow a rotisserie from a friend of his...
I charge $2.00 a louvre. If the hood needs cleaning, disassembly etc. I charge a setup fee. Strip it first.
I work alone fulltime, I do my best work by myself, that being said, every so often I need some help. My wife helps out when I need an extra set...
Chrysler Astro Dome gauge for sale, really nice shape, perfect lense, trim piece, chrome is above average shape. $250 plus shipping, PayPal OK.
Loctite won't work for headers, too hot. Check the bolt length, make sure they are not bottoming out before the proper torque, seen it happen....
rule of thumb, one amp per one thousands of an inch of material.
Honestly, a 220 machine is the way to go, check Craigslist and the local used market. You'll get much more use out of a 220 machine.
1. What do you want to weld?
2. Where do you want to weld? Do you have 220V? or just 110?
If you are just doing body and only have 110V, buy a...
You built it - hot rodder
You bought it - street rodder
regardless of the car.
Scored 16 and counting, couple more planned in the next year or two. (Couple of big road trips)
you lost me when you said you don't drive in the rain.
Toss them out and buy a proper coil over setup even if you have to modify the mounts, those are going to fail.
TROG East, Wilwood is great little town and TROG is awesome.
That's quite the list!
I have a HAMB sticker in the back window of both cars and my Alliance tag on the '28, some people get it, some people don't.
Very nice, I know what I'm getting from Christmas!
Whew, good question! Although my father's initial reaction was related to my racecar it would have been the same if it were a hotrod or custom. My...
I say go for it, of course I might be a little biased...
in all honesty, get it on the road first, then assess whether in needs it or not.
Overall diameter is 28"
Separate names with a comma.