The Jalopy Journal
When I stripped the paint off of my 56 f-100 I used a cheap Harbor fraight 4 1/2 angle grinder and Norton Rapid strip blue wheels.Didn't have much...
I'd go with the Ply.But then I'm a little biased.
Nice truck.Have fun with it.
Been a member of the"Wheels Of Time" of the Lehigh Valley,Pa. since the early 80's.
Allright, just read my question and the needle and seat should keep the fuel in the bowl.Still wonder about the fuel pressure in the line.Thanks
I have a 350 olds and a quadrajet carb with a mechanical fuel pump.With a fuel pressure guage in line it shows 6 psi when running but when shut...
So the Allentown site was to small,so lets move to a smaller site.Must be more to that.Money?
Parts came from about 27 different cars.Mostly gm.Sorry Mopar guys.
Is the fan wired correctly so it is running in the right direction so fresh outside air is passing through the radiator.
Wildwood Boardwalk Show in Sept.Cancelled.
I have a GM column in my ply.Had to replace the turnsingle switch in the column.When I reinstalled the steering wheel I made the nut to tight...
Bought a nova that the owner couldn't get it running right.Poked around it a little and noticed that the metal vacuum line was just floping...
Welcome to the HAMB Ken.This is a great place to hide out at.
Nice coupe and flathead.I like the paint in the first picture.What brand is it and is it semi gloss or matt finish?Thanks
Welcome to the HAMB Sarah.Great intro thread.Lots of knowledge here and people ready to share it.All you have to do is ask.Looking forward to...
Most are for sale.They'ed sold cars around the world.Located in Morgantown pa.
Working on this 56 F100[ATTACH]
I use the blue 4 1/2 inch rapid strip wheel on a cheap HF grinder to remove rust from steel.Works well,just round out the edge of the disk so it...
Anyone ever see a raped Ape run.and who ever had the balls to rape an Ape.
Thanks for the reply.Seems to me that installing them right and occasional maintenance helps keeping them safe.
I wasn't sure how to correct the lack of a title and asked that the mods. could remove that thread but they corrected my mistake.Thanks all for...
Thanks for the replys.Keeping them tight was my concern.
Moderators feel free to delete this thread.forgot title thanks
Messed up the first post.Anyone have problems when using unilug aluminum slotted mags like them not staying tight or others issues.Also what are...
I have two aluminum slotted mags which are unilug.Anybody have problems with using this type coming loose.Also what are the lugnut tourque...
But there's always that one time when it turns out to be something special,which is why we always look.
Here's what I'm doing on my 56.[ATTACH]
Separate names with a comma.