The Jalopy Journal
It looks like a box of champion spark plugs for a Hudson Invader engine that was used in a LST. Land, Ship, Tank.
Very cool!!! And that is great that your family is involved with models. My girlfriend is building the Lincoln Futura Concept car. I have always...
I am proud of you man!!!
Thanks guys! Yes it is strictly a race car. I am building another car for the street.
I'll be there
Make sure your butterflies are seated correctly and not stuck open or bent, if they are too far open you will get unwanted fuel and that will...
I can get you any and all parts for your car. Anything!!!
Also check and see if your lever on the side of the trans is engaged all the way. If it is in all the way the trans will freewheel until the...
Sounds like you have an overdrive unit trans. One is a solenoid and the other is a governor. You have to run a cable for the mechanical part of...
Very nice Dale! I would love to see your truck and all the great speed equipment.
I love your quote!!! They have no clue what these engines can do. They deliver a lot of torque and HP at low RPMs. They sound amazing and it's not...
It looks like you have an 8EQ truck engine, that's a good one, solid lifters. It will be tough to get the truck engine lower oil pan to work on a...
I covet them too.
Ahh, my bad, disregard the running adj. procedure.
Flow test your suspect cylinder since a compression test is out f the question due to bent push rods, pressurize the cylinder with a air blow gun...
For some reason it sounds like your not on the base circle or heel of the cam when adjusting. I would do all zero lash settings when the engine...
eleventy-seventeen dollars, hahah just kiddin , I do believe there is a Kelly Blue book for this type of dilemma.
Well here are some pics as promised. I had to dig real deep for these. I found some old love letters from past crazy girlfriends too, hahaha. The...
The 1E10 license plate stood for one experimental, one off. We built some fun stuff we when we had the time. Most of the time we were very busy...
It was an old 37 Terraplane sedan that I cut up, we used for sets of 37 hudson rear fenders and a 41 hood for the boat tail. Bill loved to play...
I built that car, me and Dick Dean collaborated to make it just like Bill's drawing. It was a fun car to build and drive. I put an Inline 8 and a...
All set, I just sent the paypal info and instructions. Thank you very much for your support and kindness.
Congratulations!!!!, ebbssped you won this amazing timing tag. Payment info has been sent and thank you again for your support.
Auction ends at midnight tonight. Get those bids in before it's too late.
That is an extremely rare Pick-up. I love it!!! Congrats!!! I have built many Hudson pick-ups. I would be glad to be of service if you have any...
There may be some footage out there somewhere. My parents have a lot of it. I can see if I can get some up soon. I was very surprised when I first...
Tabasco sauce.
We have a 1960 Buick LeSabre with a low mileage 401. I had the same problem with overheating. I did a lot of inspecting and replacing. I found...
Well it's time for some more auctions for Anthony's Family. I have gone into my vault to pull some historical stuff out for you crazy Hambers....
Thanks 117 harv, that was the rough draft about 6 years ago. I will take more pics of the engine and interior the way it is now. It's more...
Separate names with a comma.
The Jalopy Journal
