The Jalopy Journal
You are missing the feedback wire for the coil. The starter is taking all your juice
Dad's 50 chevy wagon has real wood garnish moulding
Another option might be the 80s chevy pickup "log" manifold that sits above the spark plugs. Had to use one of these on a V-8 swap into a 50 chevy...
I was -20 years old....
Your tig will spit and pop and have porosity. You need to weld with a high nickle rod or braze the manifolds.
Use a buddy with a pry bar stuck in the ring gear to keep the engine from turning..... its only the wrong way if it doesn't work
None of the aove. Gloss white steelies no caps.
They worked like they should two weeks ago when i drove it. I'll gie the dimmer switch a shot.
Hey fellers, i got an issue that just started with my brookwood. I have zero headlights when switched to low beams but all four come on when i...
couldn't have said it better^^^^^^
I like the original 54 lights....
I have an old bottle of PPG UK-403 vinyl clean, not sure if its still available but it works great,
Try adding an extra quart of oil to it. If the pressure picks up chances are your pickup has fallen off.
I'm pretty sure the filling station and chevs of the40s has them.
They interchange with the later car brake parts.
Not sure what you got there man. But could probably blow compressed air through the lines to make sure they're clear. Oh, and always a good idea...
Ditto, you need manifold vacuum, and that port is below the blades
Thats what I'm thinking- just the pump working. Ecklers and others have the correct hoses for the pump if yours are missing
I would try hooking up the pump you have. Its worth a shot, may work. I have the stock power steering on my 58 (generator driven) It feel the same...
Low beam filament burned out on one light?
Mazda rotory. I win
Love the 58 chevys dude, I got a brookwood i drive everywhere. Got any pics of your car?
Def not a 216. It has the short side cover. either 235 or 261
The pans look way better than i was expecting
I've seen the car several times at the bowling green hot rod reunion. It runs like a bull and looks great doing it
Do you have the voltage feedback wire from the solenoid to the coil? Sounds like your starter is taking all your power you need for te coil
Did you have the same problem prior to installing the regulator? If not give it some more pressure.
Both of the trannys are side shift,right. Why not swap the linkage and shifter over to the 46?
I hated it when that internet bull**** wiped the cam out on my bbc!
Separate names with a comma.