The Jalopy Journal
Great build, I work in Corsicana sometimes, would like to see it in person. Looks great
It’s not finished yet and I don’t own it but I think this one will be when finished.
350 is off topic I guess, so I asked also about 327. Thinking SBC as mentioned with Muncie 4 speed and RPU and A frame. Just in planning stages...
if I had a 4 bolt main 350 with flat top pistons, and 64cc camelhump heads, would an Offenhauser intake with 4 Holley 94's work ok or...
Last bump, then it all goes in trash
Bump, added cast iron early 60s bellhousing sbc to the deal
[ATTACH] 1000 lb engine stand. Comes with '69 307 block,crank,rods, and pair of '882' heads, cast iron bell housing.
Pick up only
got a 1962 9"rear, 5 on 4 1/2 wheel pattern, 61" wms to wms
Probably needs rebuild. Pick up only, may deliver in dfw area.'
I have searched and cant find info on this RPU. Do ya'll know if there is a build thread for this one? Thanks[IMG]
Great looking coupe!!
looking good, it's gonna be pretty cool!!
Merry Christmas to all!! And thanks to all the troops giving us the freedom to celebrate, ya'll be safe!!!
Cool pic, saved also!!!
Happy Thanksgiving everyone!!!!!!
my name is Randy and my last name starts with a W. Also the same name I use on other forums.
I love the rendering of the last pic you showed, like a one seater fighter. Too cool
Thanks for that list, that will come in handy for me too.
Congrats and good luck!
I agree with your comments, lucky for me I can't afford to hoard:)
I'm doing the same thing. I picked up a 58 Edsel 9" that has the big bearing ends but had the 5x5 bolt pattern. This is a 2.91 geared rear, but...
This is a color a bodyshop was painting a 56 chevy pick up, I had them paint the guitar body at the same time. I think it is a seafoam green.:)
Like the way you did the kick up, there's always new ideals on the HAMB, cool.
Thanks, you guys are great! I didnt have a file so i used a dremel tool with a pointed grinder end then sprayed with wD40 and did as F&J said and...
Thanks, I'll try that
So, I got this 58 9 inch ford rear out of an Edsel, it seems to be just the right width for me. Is there a trick to removing the drums? They...
Thanks, guess I need to go back to the salvage yard and look.
Is a 58 edsel rearend worth rebuilding? Is it the same as modern 9 inch fords and is it big or little ford wheel bolt pattern? Thanks
Separate names with a comma.