The Jalopy Journal
58 chevy wheel that has been hanging in a barn forever. 150.00 plus the ride
Nos 6 slot red model a steering wheel. Its been hanging in a barn for at least 50 . 125 plus the ride
I know this is an old thread but that is a cool intake
Just run them
Real nice set of oem steel running boards they came off of a 40 chevy pickup. Only rust is on the bottom mounting tabs that they repop. I was told...
Sold pending final payment
[IMG] 49 ford club coupe with 69000 orig miles v8 3spd. Wide whites, skirts and fulton visor. Runs and drives great. All original car that...
All steel 1940 chevrolet pickup sbc motor and trans (3spd auto) mustang 2 front end. Solid cab, bed and rear fenders. The front fenders have been...
Custom ross pistons. 3.5 inch bore, 4 inch stroke, 7 inch rod with total seal rings. These were custom made for motor city flathead for a...
How wide are the 16" rims
Steve sellers car is badass
Sixteens on a shoebox is killer..
Very rare factory 16" rims for 49-51 ford cars 5 on 4.5" bolt pattern come with 1950 hubcaps and 4 of the 5 have trim rings. 5 rims total all from...
Flatheadmerc is my ig
Someone posted on the ford barn a guy that hand forms them and they are like 2500 a pair. The guy making them has a wab site i just can't find it
Red high temp silicone
You may have to buy straight ones and bend them to fit..its a pain in the ass.. esp the outer ones that go on the stainless that are stapled to...
Reds is your best bet...speedways are crappy
Pot metal....i have seen brass reproductions
I think only lenses are reproduced
Wow that is on old high volume bus pump. Back in the day that was what they ran on 3 or 4 carb setups...very rare and $$$
Uncle max sells a brass insert that will fix them. That is the best fix. Or you can buy an oversized needle and seat @ vintagespeed.
I use a sheet metal screw in the side at the bottom. Take out the screw pour what u need in a seperate container then put the screw back in. Had...
Separate names with a comma.