The Jalopy Journal
Its cool to see some local stuff on here, i started driving my 64 falcon again now that its cooled off.
Clearwater Beach in Florida
Hey I'm in vfa-192 wereare you?
When i got my first one done that is what i did, but i was told 1" . I have 2 1/4" is that to much and what could happen if i drive it? I dont...
I did 135 in my 70 GTO it had a fresh rebuilt 400 and 2.79 rear end. my tack was at 4,700rpm. Then i got passed by a Volvo that must have been...
I have a 64 Falcon with a 289 and c4 tranny. I put in a 8.8 rear end needed a new drive shaft the one that was in there from the 9" was to long. I...
Been in 16 years as of now, working on F/A18's (baby hornets) in lemmore,ca.
didnt know about it, i may go if it ever stops raining.
thats a very nice car.
this is an oldie, but i am going to try it out on my 64 Falcon wheel. it has a few cracks in it and looks like it was painted with house paint at...
God, If only i had listend to my mom.
i have a 65 i am selling cheep
Going down to tampa tonight, then run a 5K. Back in Jax friday night. Sat. i will start putting the pass. side windows back in the door, on my 64...
Im going to look in to that.
were can i get a hood like that?
3rd gen Navy, 15 years in 5 to go. 5 ships and spent a year in Kabul also.
did i ever post a pic of mine on here?
just got home had a good time made a lot of contacts.
Arlinton in the house.
I got mine from dearborn classics thay where about 600 for both sides and toe boards.
my car is not going to be ready. after digging around under it i found that the PO did not have the tail of the tranny bolted to anything! Will...
Ya, that is why i was over building it with the 4" drive shaft. Im not going to run the car with this one. Im going to reinstall it so i can move...
Let me tell you all the story of my drive shaft and 9" rear end. I got my Falcon with a 9" out of a Lincon with 2.40 RP and a DS that was about...
this is the car i am building.
more of a weekend driver and driven hard. I will bring it to the shop that shortend it and see what thay say if it is to deep i will start over. I...
ya, im on the hunt for a ranger ex-cab truck to get one out of. ther go's anouther 150 down the drain.
I think thats what i an gong to do, i just need to find another used one. I retubeing is 160 dollers just for the tube and about 100 for labor. I...
Its about 4" thick and not much clearance.
Separate names with a comma.