The Jalopy Journal
I used this with a 350 tranny and like it as well as the price.
We didn't have any tractors with automatics
I replaced my oil pressure safety switch with this item which when turned on primes for 3 seconds. It can be made to
prime additional times just...
Some appear to be 36 - 37 parts. The second picture shows the piece which goes just below the front of the radiator.
The shroud is not.
I installed it last week and love it. If I left the car sit for two weeks I would have to crank it over for a long time
before it would start...
The EZ techs were very helpful when I had a question with my install. Call them
The best thing I have found for sealing caulking tubes is Tyco Adhesives Nashua tape. It is foil faced but
has a very sticky adhesive. Much...
I had one of those crappy glass fuel filters come apart (not unscrew) and spray gas all over the passenger side
of the car pictured while driving...
Your old pickup is in Rapid City, SD owned by the president of our Studebaker Drivers club.
try Seal All. It is a contact adhesive and sealant. I have used it to seal a leaking gas tank.
About any hardware store will have it. I don't...
Here isa 37 Studebaker wheel which looks very similar.
I had a newly over hauled 283 that would not start because the lifters were not tight enough.
I haven't read this thread but in relation to the initial post this thread might shed some light....
Well you are correct about not getting a good bleed. I used quarts of fluid trying to get a firm pedal and never did.
I think I will remove it....
These were Studebaker but I saw a restored Mopar with them also.[ATTACH]
I read somewhere that a combination valve must be installed lower than the master cylinder. Can anyone confirm
or debunk that. I have one on a...
I have both and prefer the Gennie. I like the detent feature which make is much easier to select the gear
you want. I find the Lokar much more...
Justice Brothers Stop Leak Take a look at the video
1964 Studebaker Strato Blue. I am amazed at the number of people who comment favorably on this color. [ATTACH] [ATTACH]
I called and the tech said it was good. I believe he said it was a 9000 ohm coil. Some sellers listed it at 10,000 ohms
while others had it at...
I have a Pertronix FlameThrower II coil with 0.6 primary resistance. All the information I can find (which I cannot find on the Pertronix...
Carbking is correct. I checked the parts book not my memory. Sorry for the misinformation.
if you do a search for "stromberg WW parts" you will get several options on where to get parts.
the power valve for the supercharged 6-121 and...
[ [ATTACH] [ATTACH]
Me with some cars I have owned
[ATTACH] Coming back from Carson City
I use Avon Skin So Soft for cleaning oil, grease, tar, etc. from my hands. It works great and leaves
the skin undamaged and soft.
The 1957 Studebaker setup
Separate names with a comma.