The Jalopy Journal
This one is for sale. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Cooker Bias ply on on the A are fine, I have Cooker radial www on the 51 Kustom and will not ever buy them again. I always deal with Summit as...
I've managed to buy up a couple of large lots of deccent A parts in the past year. There is to much there to throw away from what I can see. If...
It's a really dumb handle but, I live in Colonial Williamsburg and I have a coupe.
We were supposed to pick up our daughter and 4 grandsons today at the airport, it would have been the first time that we met face to face with our...
We have been doing Hershey for a while, not as long as some of our neighbors up there who inherited their spaces from their parents. I will not...
Reversed eye on my avatar. Think it's 7 leaf had to put a spacer under it to get it to clamp up. Rides better than stock.
[ATTACH] Burns intake, single 97 and B distributor converted to modern points. Very pleased with this setup. The distributor makes a huge...
[ATTACH] we drive it, but there are some places that I know not to go.
A few years ago my wife had a project for me that required me to get a nail gun. I looked at all of the options at lowes and home depot, really...
Put a few gallons of gas in the tank. Hook up a hose to the fuel line and watch how the gas flows out, if it's not peeing a good stream the fuel...
Title. Its getting to difficult to get them straightened out. Friend in New Mexico tells me it's getting worse all the time out there. The DMV...
I like my 49 F1 it does most of what I need. If it's something to big or messy to haul from the lumber yard I'll just rent the Lowe's truck for...
32 to 34 front axle possibly up to 36 will get you some drop and you can still use the mechanicals. Dr. Dave has a good write up here on the hamb.
The 51 in the avatar for a decent Model A roadster, 4 banger is preferred but who knows. East coast would be nice. Open to offers, do have a soft...
Yes but you have to Bush the small end for the difference in pin size. Snyders is supposed to sell a rod that works out of the box but I haven't...
Thanks, found a bunch of info over on ford barn. Interesting subject. Sold my 30 coupe almost 30 years ago, there wasn't much information back...
What's the advantage of using Chevy 283 pistons in a Model A rebuild. Thanks
Set it to the trailing edge of the rotor blade
Noticed at Hershy that Honest Charlie had everything discounted and no new in inventory, couldn't get an answer from the guys as to what's up with...
Newport News city park every late October
Original owner/builder
[ATTACH] I can't remember the whole story but it was built back in the day by a guy in our club, someone in his family owned a junkyard and told...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
My chopped and lowered 51 is no match on the interstate for a 5000 pound SUV with a 20something chick driving on the cellphone at 85 mph. We stick...
The cheap reproduction parts will break first. I'm told 4000 rpm tops for dipper rods, school me if that's incorrect. They're darn near...
Getting antsy, we're picking up some friends flying into Virginia late Saturday from New Mexico, car show Sunday leave for Hershey Monday....
Looks like the French v8 60 with the heads like an Ardun, I read about it years ago in V8times. Simca built them if memory serves me right.
[ATTACH] Three of my Grandsons doing the hoodlum shot for Grandpa before their Dad got stationed in Japan. Sure miss them
GDB18-19 Model A and newer.
Separate names with a comma.
The Jalopy Journal
