The Jalopy Journal
2 inch hole, or total diameter? P.M. me.
What is the dimension your shooting for, and what do you consider to be "cheap"?
Where is it?
All right choptop since we're venting...here it is. I came down with the SOLE purpose of collecting another Billetproof T-shirt and sticker, not...
Alright, well. I've been working mostly on the chassie, cleaning painting running lines, all the boring stuff. But, I did take a break to...
I have also been painting interior trim. I have almost all of the interior steel bits painted in their first layer of color, then comes the fun...
Weeellll...here is another small update for those of you out there keeping track. Not much new, mostly just boring mundane chassie clean up. But I...
Me too! :D
Here is a quick update. A mile stone has been reached the final color has been put down on the dash. [IMG] [IMG] [IMG] Im going to hit it hard...
Lucifr- You need to come over and check it out. Its good to know you're not dead. kimb82- I've been working mostly on the drive train and running...
Well heres some more boring suspention progress, but at least its progress. I was concerned that if I ever blow a bag The car will be so low I...
Everything I've seen and been reading indicates that there is no tsunami warning for the pacific coast or the reast of the U.S. excluding hawaii.
looks like a tsunami is headed for hawaii too.
I think DocFrankinstein got it heres the thread. its near the last page....
Its actually a early to mid 40's Reynolds electric motor, as for the rest of the parts, as I understand it, they are a hodg podg of parts my...
Now the the body is no longer in the way of progress on the frame I started taring down the front end and finishing up all of the lose ends from...
Here Is some more crap. The hood saga continues. The shrinking wasn't moving things along quick enough so I went ahead and marked out for my pie...
I hope so. I have switched gears a little. I am focusing on the mechanical aspect for a while to get the thing drive able then hammer out the rest...
I dont know.. I think that blue ford pickup could stand to be lowered a little bit.
Actually I'm thinking Donk. :D throw some 28's on there It'll be perfect!
Soooo...one thing led to another and... [IMG]
Alright heres some more hood stuff. I got the front panel all welded across the top and the tip of the filler for the rib all welded in did a...
Thanks James D, I had the tape running all the way across the front so I could visualize the new body line. I was pretty hard to see with the old...
Hey guys heres a short update for ya. I got the roof stripped and all of the window channels cleaned out and Por-15'd. A little mud and some...
It looks like a nice car, but I spent a lot of time in that building and dont even remember seeing it.
Thanks guys James D, where are you in germany? DynaFlash, when ever man Im almost always here.
Any thing will fit with enough welding. :D But I looked in my book too and they look damn close. If not it wouldn't take much.
I got the jones to start on the roof and couldn't do it with glass and trim in place so it had to go. [IMG] [IMG] I found a lot less...
Why yes I do have some updates I'v just been lazy with the posting. Heres what I'v got for today. The is a bunch more cancer on the inside...
I saw it this evening and thought it was good.
Separate names with a comma.
The Jalopy Journal
