The Jalopy Journal
[ATTACH]
I just read through this build, what a great Job building your first Hot Rod ! It reminds of my first one 50 years ago learning as I worked on...
[ATTACH] I think it looks great! I believe painted would look fine, and chromed plastic probably the best. I fitted a Stewart Warner tach in mine...
Bud Bryan [ATTACH]
No problem at all so far!
Here’s a pic of mine with a rear z in the rear frame. Look at my build thread on page 6 for more [ATTACH]
Page 2, and 14 show how I did mine. https://www.jalopyjournal.com/forum/threads/richs-coupe-a-ten-year-odyssey.1172804/ Rich
Here's one more taken at the Park behind my house. [ATTACH]
Thank's for the kind word's guy's ! I had my son take the Coupe to the local Dunkin Donuts. On Thursdays they offer free coffee, and donuts to...
Here's some current pics: [ATTACH] [ATTACH]
Thank's for all the kind words guy's. I love doing it. You have to remember most of this was a year ago, and I was having a hard time getting...
This should have been in the electical pics. I added a kill switch in the ground wire side of the battery. will move it to the side panel later...
I don't know if I got those videos right or not, should have been three. these pics were leading up to the first drive. [ATTACH] [ATTACH] [ATTACH]...
Last one: IMG 1935 - YouTube
First drive: [MEDIA] firstdrive - YouTube
Loubang: I still have trouble making it repeat. I'll check later, I have a couple more I want to post. Rich
More Assemly picks: [ATTACH] [ATTACH] [ATTACH]
Lets see if I can post a video of engie start up, I'm taking the video: [MEDIA] Rich
Getting it together: [ATTACH] [ATTACH] [ATTACH]
nunattax: I picked that miorror up a few years ago at Kalamazoo car show. I'm looking at these:...
Thanks Guy's ! Will try to get some engine pics up today.[ATTACH]
A few more pics: [ATTACH] [ATTACH] [ATTACH]
Some more pics that show the mat held down with seat, and trannie cover. [ATTACH] [ATTACH] [ATTACH]
Blues4U: I fabbed piece of 16 gauge for the firewall, and has a piece of rubber mat glued to it. the floor rubber mat is not glued down, and is...
Redrodguy: All good points . I had meant to polish that piece, but went on to finish everything else , and never got Back to it. I don’t mind...
Pete: Where did you get the shoes arched to the drums? I see you live close to Fort Wayne, which mill do work at ? I live about 5 minutes from the...
Needed to get the wiring in before setting engine. I used American Wire to do mine. I made the dash removable with 2 quick connects, and pop out...
32fenderless: You built your first car with a lot of attitude! I love that look, good stuff thanks for showing it. Rich
Separate names with a comma.