The Jalopy Journal
^^^^ I like the pipes on the Coupe.
A model starter with bendix spring as a resistor [ATTACH] [ATTACH] B model starter. Should of waited until I got home before posting earlier.
Do some people smoke it?
Hence the I think,,, been wrong before and it will happen again, away from home at the moment, otherwise I could’ve wandered out and checked both...
I think As are 2 bolt and Bs are 3. I think, I’ll check it out for you when home.
I welded a tag onto a broken end of an A bendix spring , drilled a hole through the tag and bolted it to the starter terminal, with the other end...
At least the coolest stock heat sink ever made! Cool picture.
Pleased to say I personally think there are plenty of great people on this site and I’ve been pleasantly surprised by the great gestures I’ve been...
Overthinking it maybe, but when working out the interference of the piston Bushes, wouldn’t you have to take into account of the piston...
I like dogs!
As strange as it sounds my A exhaust manifold appears to have shrunk/narrowed compared to the head ports. I machined up 2 offset rings as the 2...
If you’re only using this place to sell and not participate at least you could have the decency to sponsor the joint as an alliance member. Some...
Never been a tool thrower, don’t understand that. Getting pissed at an inanimate object makes no sense to me. Now a fly or ants crawling on me...
I start out happy working on most tasks, my back has a different opinion though which changes mine.
A well balanced video,something for nearly everyone, and alot for others.
Nice touch mate.
A friend has a Jaguar V12 ( home built intake with 2x4s amongst other mods)in his T roadster and stuck some small blue oval badges on the cam...
I like the fuel block Colin, make that yourself ? Finding a later block here with the full flow filtration is the hard part.
Thanks, I’m up with the vent holes now, I’ve also been reading about softening up the sharp edges in the combustion chambers so as to get rid of...
I believe you’re right, Hemi mounts I have bolt directly onto Cad motors, I have a couple. The op could try going down that path on finding mounts...
Hi Jeremy, gotta get that 390 up here and get it run up sometime. Did you get you intake sorted?
Thanks Colin, great to hear you got yours fired up. All good? I got mine running a few months back and are stoked! Ran really good on the run...
Thanks but I saw this via another thread a few days ago but most distributor boots are around 3/4” ID on the large end whereas the Flamethrower...
Thanks for all the replies, I’m running 7mm wire as that’s what the flamethrower terminals are designed for but aren’t happy the way it looks ,...
Who has what they consider to be a real tidy way of running plug leads. On an open engine bay tidy leads from the distributor to the plugs look...
What a blast that would be!
If the choice is do the 1/2 hr trip to town for a cotter pin because I don’t have the right size new one or reuse an old one the choice is easy....
I sent a bank cheque via Australia post to a member in PA from Australia via registered mail (trackable and has to be signed for ) ,which costs...
Any hints, advice, do's or don’ts to mounting a Lion 3 head to a B engine. Engine will be standard except for downdraft carb,distributor, intake...
What are these window sills people speak of, must be the skinny shelves at the bottom of the windows.
Separate names with a comma.
The Jalopy Journal
