The Jalopy Journal
Shoot, if our tranny wasn’t scattered all over the bench we’d be there with our 30 Chevy coupe. All the best to him and all of your family....
I need to replace the synchros for 5th in my NWC trans and I figured I’d go through the whole thing while I’m in there. Where’s the best place to...
These are new 97’s I was just playing with the linkage after swapping the problem child with the forward carb and now for some reason the back...
After finally getting our car on the road, I’ve been working some of the kinks out. We’re running a flatty with 3 new Stromberg 97’s on straight...
Definitely 29/30 Chevy. Sent from my iPhone using The H.A.M.B. mobile app
I think you’re running out of Desoto. Sent from my iPhone using The H.A.M.B. mobile app
Never mind. I actually looked it up like a grown up. May 18th. Sent from my iPhone using The H.A.M.B. mobile app
What weekend is Parking in the Park? Might actually have ours on the road by then. Finally had a maiden voyage around the block. Have a handful of...
Thanks but too far. We’ve only taken it around the block so far. Sent from my iPhone using The H.A.M.B. mobile app
I asked this long ago but I need an update. Had someone do a fair job but he cocked up one of the tailpipe flanges. Need to have the flange cut...
Denny-Naw, thanks though. Would like to fine a C10 SWB (just like everyone else). Sent from my iPhone using The H.A.M.B. mobile app
Well, I’m here at any rate. Just gnawed through 3506 post over the last few days. Hope to nab a project this fall/winter. Had a 61 Apache for a...
Dig through my spares and found the other fork. The bearing slipped right on. Woo hoo! Sent from my iPhone using The H.A.M.B. mobile app
Big Duece-Your fork is different than mine. I think I have another one somewhere. Mine is thicker (if I do say so myself) and so the groove in the...
Big Duece-Did you ever have that bearing on the clutch fork? I picked one up and I think it’ll work but it won’t drop all the way into the fork....
big duece-man, thanks so much for going to the trouble. That helps a lot. V8 Bob-But I’ve already chromed everything! Haha! That is a thought....
Hmm, you may be on to something. It's a lot deeper than the stock one. If its not too buried could you get me an ID, OD and depth measurement?
Here's the throw out/fork and the pedals. [ATTACH] [ATTACH]
big duece-It’s the stock clutch fork and bearing retainer. V8 Bob-Two reasons I can’t lengthen the clevis. First, because of the geometry of the...
Looking for suggestions for my motor/tranny set up. Have an 8ba with the 2 piece bellhousing (hogs head), a Dwight Bond adapter and a T5. I'm...
Ok, I'll throw this back up and see what I get. I haven't had a chance to get back to the clutch problem since posting. Had eye surgery and doc...
Alright, we attempted our maiden flight this afternoon and...(@#&$)! One step forward and 14 steps back. I couldn’t get the clutch to disengage...
Just a quick update. Of course, frickin ground. Never found the break. Just ran a new one. All is well now. Thanks for all your help. Sent from...
[ATTACH] Not the best pic but, asymmetrical striping on my father in laws car with his club mascot. My neighbor is an awesome, self taught...
Careful on dearching the front springs. As I said on ours, we did just a little and the end of the through bolt was nearly touching the frame....
Nope, just good ol’ fashioned incandescent bulbs. America [emoji562] Sent from my iPhone using The H.A.M.B. mobile app
I appreciate all the suggestions. The grounds are all good. The two gauges in question are on the same side of the cluster. My guess is they are...
I’ve gone back through all my grounds but I’ll run a temporary ground to the batt. Sent from my iPhone using The H.A.M.B. mobile app
Ok electrical gurus, here’s a weird one for you. Finally got our car together and started. It’s a 30 Chevy but irrelevant to the issue....
I’m running a Powermaster vintage looking alternator. Plus it’s slung off to the driver side using an Offy offset gen. mount mounted at the front...
Separate names with a comma.
The Jalopy Journal
