The Jalopy Journal
One more pic[ATTACH] Sent from my SM-G930R4 using The H.A.M.B. mobile app
Thanks for the tip Ron I got a 64 comet roof and it fits like a glove [ATTACH] Sent from my SM-G930R4 using The H.A.M.B. mobile app
Try adding water thickener it's for old farts that can't swallow liquids it's a powder you mix Sent from my moto e5 play using The H.A.M.B....
Years ago I had good luck with french lake auto parts in minnesota. I was looking for a seat for my 46 ford and they sent pics out of maybe 5...
Make offer Sent from my moto e5 play using The H.A.M.B. mobile app
If u remove headliner I would carefully remove what's left of it and save the headliner and any other interior for patterns u may need it. And...
anyone?? make offer
listing for friend. 1964 jetstar 1 394 345hp high compression v8. last owner had it since 71' been sitting long time. 99% complete. motor is...
This is the back before I cut out the bs[ATTACH] Sent from my moto e5 play using The H.A.M.B. mobile app
Here you go[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Sent from my moto e5 play using The H.A.M.B. mobile app
Ripped out the 2nd and 3rd row bench seats out of my Ford e350 and started breaking them down to take to dump and they look like they would work...
[IMG] Lixie, you can buy replacement ends also
maybe run hard line and then slide some of the red hose over for the look your after?
here is some ring gear specs
http://www.pioneerautoinc.com/catalogs/ look in there flexplate catalog some good info in there in the back pages also some specs. looks like 168...
Clip holds seat and holes are for some kinda trim?? I'm guessing Sent from my moto e5 play using The H.A.M.B. mobile app
Maybe for a trim piece in front of seat? Sent from my moto e5 play using The H.A.M.B. mobile app
These??[ATTACH][ATTACH] Sent from my moto e5 play using The H.A.M.B. mobile app
I will get talk to my buddy he has a 49 with seats out.give me a bit. Sent from my moto e5 play using The H.A.M.B. mobile app
maybe get bolt holes in and mounted just snug. then mount indicator from crank and rotate crank with indicator attached and tap around center of...
https://www.enginelabs.com/news/own-a-significant-part-of-racing-history-offenhauser-patterns/
I was looking at that I am guessing it's the 3/8 super Sent from my Moto E (4) using The H.A.M.B. mobile app
Anyone have any specs on this camshaft.it has .375 lift.thinking it's maybe a potvin grind from what I read moon bought potvin...
Ya, i googled it i think the numbers are transposed nothing shows up for 8012kx ????
Just my 2cents whatever you do I wouldn't pressurize it with more than a few pounds of air. It's not designed for it and could kill you.air...
N/m looks like gauge trim had stud. No room on dash for those brackets.sorry to highjack thread.[ATTACH] Sent from my Moto E (4) using The...
Looks like .5 inches high and about .9 inches from inside top. Bend some up.[ATTACH][ATTACH][ATTACH] Sent from my Moto E (4) using The H.A.M.B....
Here's glove box trim I would assume they are the same. Looks like they're brazed on??[ATTACH] Sent from my Moto E (4) using The H.A.M.B. mobile app
https://www.jalopyjournal.com/forum/threads/lasalle-ford-conversion-courtesy-of-bruce-lancaster.408427/ Thanks Bruce and little wing!
looks like a radiator drain petcock? left hand threads maybe?
Separate names with a comma.
The Jalopy Journal
