The Jalopy Journal
i have a 1953 3100 has a 307 smallblock mounted with a v8 bellhousing with rear mounts and a hurst style front mounting plate the rear mounts look...
I just purchased a 1953 3100 5 window it came with a 307 smallblock, mated to the original 4 speed and torque tube rear end the front suspension...
i am installing a 283 and saginaw 4 speed in my 46 chevy i would like to use the original clutch fork and linkage for the floor pedal with the v8...
i would like to put a 39 chevy car 3 speed in my 46 coupe to have the floor shifter rather than the 3 on the tree. does anybody know if the trans...
i need to swap crankshaft pulley from 1946 216 motor to a 1956 235 what is proper procedure to remove and install pulley on these engines?
i finally got the 46 coupe down to bare metal sanded most of it with 80 grit. it is probably going to sit a whiel befor any paint or body work....
my project is a 1946 chevy coupe, thinking big block chevy or olds my question is has anyone used a front suspension other than mustang two that...
can anyone give me some pointers on removeing the stainless trim on a 46 chevy coupe. iy has stainless around the glass, window openings, a lot of...
my 46 chevy 216 motor is stuck solid so i have a 1956 235 to replace it with. looks like the front mount plates are totally different the 46 is...
i am going to remove the original 216 from my 46 chevy. what is the best process to do this? putting in another pre 55 stovebolt. thanks
I have a 46 chevy coupe that has a tired engine i am thinking of selling car but would like to update the engine first. what 6 cylinder would be...
would like some ideas on the best rear axle to use in a 41 chevy converting to open drive line
i have seen a lot of discussion on hydraulic cltch set ups so i thought i woulg pass on some info that works well. i used a 1982 chevy truck...
i have a 41 chevy with a dana 44 rear axle in it. not sure what it came out of it is a 6 lug bolt pattern. the rear springs are stock and the...
I have a project that needs some repair panels welded in ( rockers, floors, lower cowl, and lower quarter ) i was thinking of a harbor freight...
i have a 41 chevy coupe the right door opening was a 1/4 inch too small as the cowl on the right front was pushed back from a crash somewhere over...
i would like to see pictures of 41 chevy coupes projects or otherwise. any 41 chevy coupe gasser projects going on? would love pictures
just signed up. i am working on a project 41 chevy coupe hope tp end up with old school gasser type car. i have built other cars like a 54 bel air...
Separate names with a comma.
The Jalopy Journal