The Jalopy Journal
[ATTACH] In front of Hendrick Motorsports. Concord, North Carolina. 1600 mile round trip.
2 leaves removed. 1 1/8" sway bar. Modified a Geo tracker bar.[ATTACH] [ATTACH]
How much base timing at idle? Is vac advance manifold or ported vacuum? Try manifold vac if using ported.
EZ Wire user here. No problems.
1. Get the front end in order. king pins, tie rod ends, steering box, etc. 2. Brakes. Speedway sells a front disc kit for less than $300. Lose...
Use a dimmable transformer like this....
Before we had our first child, I suggested Holley for a girl or Carter for a boy. The wife thought they were great names. I told her they were...
[IMG]
3rd gen Camaro/firebird(82-92) are just less than 62''. However, if you are planning to apply mediocre amounts of torque, you will eventually...
1956 IH 300 Utility here. Front end loader, bush hog, and grader blade. Torque Amplifier still works good. Live PTO and down pressure on rear hyd.
Ya tryin to drive with hand cuffs on? LOL:D Frosty-Spend the coin and get the right box. Then you only have to do it once.
On the contrary. Mexican water has ben proven to get things moving. Sometimes in a BIG hurry.:p
That was badass. No wasting film on BS burnouts. All WFOT! All the time!
Back in high school we discovered we could terrorize the town with backfires. While cruising along we would: 1- drop down to a lower gear and wind...
I lke the simplicity of points also. But here locally, it's difficult to find parts in stock. The big chains have them but only in their...
Ive done two shafts at home. Both worked great with no vibes. 1st was a jeep shaft. Had fixed yokes on each end and telescoped in the middle. I...
I looked through your build posts. You have a lot accomplished. What project is ever done anyway? I say if you like it get it driving and use the...
I had the smash up derby set also. I think mine were black and gray colored. I played with my erector set for years. Came in a blue tool box. I...
The biker and van crowd are/were much wilder than the car crowd (imports not included). I'll admit the recent tatoo generation of ladies could be...
Agreed. Shows are the same way. I dont want to hear 50s doo wop blasting all day. Hell, I dont want to hear any music blasting. I must be getting old.
The Crossfire intake has very small ports. They are half the size of the port in the head. However that does not make it all bad. For low speed...
Variety. I dont want to see the same thing a thousand times. The bullshit of ''I hate ratrods or I hate billett'' is just that. Bulshit. Look at...
It's fixed!!!!!! Pulled the trans today. It must have just been jammed somehow. Push the pedal and disc floats between flywheel and pressure plate...
Yea, the pilot fit OK. I removed the bottom shield and from under the truck and you can't seperate the disc from the plate when the pedal is...
Less than 24 hrs. Ocean? The only waves I hear is the tranny waving me back under the truck.
The raised side of the disc it towards the pressure plate.
I shortend the input 1/2''and the bearing collar 1''. The problem is the disc won't stay forward and float between the flywheel and the pressure...
I dont subscribe to SR anymore.
I swapped the SM420 for a T5. When I started it the clutch wouldn't disengage. When the pedal is depressed the disc moves at least 1/16'' away...
S10 is too narrow. Most just do a 70-81 camaro subframe up front and camaro rear axle. sits low and looks good. I was almost one of the sub frame...
Separate names with a comma.
The Jalopy Journal
