The Jalopy Journal
I'm in Rowlett, a little closer.
Here's mine. Had it since 1976.[ATTACH]
71-72 bolts right in. Can't shorten later axles because that would cut off the c-clip groove and the there would be no way to retain the axle....
No, they are too long.
e-mail sent. Will the giant ants be there?
The biggest problem with the 330s is the cam. They had a different lifter angle than the later 350-455 Olds. All 330s came with a forged crank and...
That's my boy! Eric' mom and I couldn't be prouder. Son you have done an excelent job!
Yeah, But they are homemade billet.
I'm a slow learner, cause not long after that I sired you!
Had one of these back in 1979, sold it for down payment on my first house.
Yeah, that is my car. To remove the bullets, I had to shape and weld in pieces where the bumper was flattened out for the bullets to mount. While...
I drive a 65 on a 69 frame. The rear cab mounts have to be from a 60 - 66 frame, the spacing is not the same. For the front bumper I welded the...
Looks good, Glad to see you stuck with the pontiac.
Except for the gold chain, his momma and I couldn't be prouder!
Son, I couldn't be prouder.
I am fidgeters dad, the lemans is mine, and yes I may be interested in another lemans, especially if the windshield is good. PM me.
My wife got me a Miller plasma cutter,
To figure out the dimensions of a p-metric radial, multiply the first number (in your case 215) by .03937. This will give you the section width of...
It was a great car for about 18 months. Then stuff started falling off and breaking faster than I could fix it. Shifter linkage fell off shifting...
If it is a 403, don't bother. 403s can't take more than a .0020 overbore, and from the way the bottom end looks the cylinders will be just as...
I have used the stuff for years. Have the brush on black on my frame and semi gloss spray everywhere else.
Check Hilborns site, they even have an EFI for the small block ford.
You have a keeper of a wife. I know just how you feel. Years ago, i found a GTO that I had to have but did not think I could afford. My wife...
i like the pontiac blue
Damn! Just how big is your shop?
small block olds, most likely 307 or 350, but could be a 403 same external dimensions.
On my 65 c-10, I used cheap block huggers and turned my head pipes out under the kick up of the frame and ran the pipes on the outside of the...
Son,just where do you plan on keeping all these cars that you really want?
Something else to consider is that the brake drum also registers off of the hub on the axel.
Separate names with a comma.