The Jalopy Journal
I spoke to the folks at Rebel and he said that I have an older harness(purchased 3 years ago) and they have now changed the green horn wire to...
I have not. It's late at night and I'm trying to get this done for a friend of mine.
I have 3 wires left and they don't jive. GM shows the black wire to the horn and the Rebel harness has a green wire for the horn. I'm confused I...
I have spent the last month looking at every picture on all 1789 pages and what a blast. Great pictures and memories. I must say Corvettes and...
I would love to have this post card. It's my old stopping grounds.
My 66 bagged with stock wheels.
and bagged on chrommies.
it did have some lifter noise before the oil change and it also has the wrong dipstick as it reads full at 2 quarts.
Changed the oil and took her on a 50 mile highway trip and she runs and starts great. The truck had been sitting for three plus years, so my guess...
Replaced point, condenser, cap, rotor, wires, checked the dwell and timing. The distributor has some wear but not bad and it still takes 3-4 trys...
The tires are 215/70-15 on a stock 15" rim.
I do need to check the timing and the choke seems to work OK.
I am having to pump the gas pedal 20+ times when it's cold to get it to start and that is with the choke on. It was like this with the original...
Find a friend with a Fed Ex account and use Fed Ex Freight. You should be able to get a 40% discount. Put everything on a pallet. Wrap it and pad...
Sounds like your pressure switch might be to low. It should take less than 2 gallons to fill 4 bags with a full tank at 210 PSI.
Welcome to The Hamb. I'm in Chico. If your close stop by.
We have a guy here in Chico,CA that charges around $80.00.
Sorry I do not have a picture but mine is mounted the drivers side of the radiator on the core support. LMCtruck.com has all of the pieces and parts.
My 66 C10 Stepside was originally owned by the Air Force.
1964 Porsche 356B
Came across this thread looking for something else. If you search around here you will see that folks use a VW Bus steering box and shaft from...
Anyone? Going to look at both of these in the morning.
Been looking for an engine lately and today found two. A 1983 and a 1988. Building a carbureted set up so I am wondering which would be the best...
Any one doing any thing with there 2.0/2.3? No post in 6 months.
I haven't posted any progress in quite a while. Here are a few pictures.
De-humped to the lower control arms so there is...
Here is a link to my new shop. Just moved in a few months ago.
Welcome from Chico!
go talk to Brandon at Hamilton. He is on the corner if E.20th and Park behind the video store
I have been very happy with my JD2 Model 4. These folks are great to deal with http://www.vansantent.com/tube_bending_machines.htm
My 48 KB. Should be finished this Winter
Separate names with a comma.