The Jalopy Journal
price drop $150+ship
Selling resurfaced Chevy style steel 130 tooth flywheel comes with built-in pilot bearing for use with Chevy manual transmission adapters.
Home bound A[ATTACH]
one of these days I'll finish the sedan![ATTACH]
Thanks guys for all your input. Going to try to check the frame and loosen all the body bolts and see what happens. I measured across between...
Don't remember if there was a gap at midpoint when I put the body on. The body could have had stress on it as I just put blocks between the body...
My 2nd top chop on a model A, first went well on my coupe. My "30" sedan didn't. After cutting roof, "B" post on left came forward against door....
Should have never sold it. Was hoping to find it in this thread[ATTACH] d
sold my 40 sedan to finance a 32 roadster build. The guy I sold it to traded it to a dealer.
Been trying to find it for years.[ATTACH]
[ATTACH] [ATTACH] .
Up for sale is an original cast iron Dodge Red Ram manifold.
Fits 241 and 270 54/55 Dodge Hemi.
Asking $250 plus shipping....
price reduced $250
Have a fresh ground Chevy style steel 130 tooth flywheel comes with pilot bearing for use with Mopar to Chevy manual transmission adapter.
here's mine with 4 1/2 " chop[ATTACH]
SOLD New,[ATTACH] never installed Moon 140 MPH programmable speedometer with GM pulse sender.
Box has shelf wear speedo is perfect condition ....
Wonder if any one can identify these fuel pumps ?
The frame is a custom made boxed frame. Hopefully the guy that built it knew what he was doing.
As for the motor, don't think that little Dodge...
Well finally getting back to finishing my 30 sedan with a blown 270 dodge hemi.
Working on getting the motor together. Had to finish my...
Been looking for my first build for a few years without any results. Sold my "40" to a local guy then I found out he traded it for a 34 to...
Been driving with these weed burners on [ATTACH] for a few years
Been a few years now, haven't heard anything. Just wondering if anyone has seen it?
like I mentioned before, suppose to be in the Texas area....
[ATTACH] Can any one identity this master cylinder? Need to replace
Have a multi carb setup with straight linkage, 4 to be exact with clear fuel lines. Noticed air bubbles coming out of one port of the fuel block....
Needs a good home. $2,800 obo
Ok, MC is good. Bled the brakes front left caliber had bubbles, bled till clear. still had problem. pinched 0ff front hoses, good pedal. released...
After reading your post again, That is exactly what is happening! As far as bench bleeding I don't know? but I think he would have done that
Car sat for awhile, went to bring it out brakes failed. Put new MC was ok then failed again after awhile. Going to work on it today, see what happens?
I'll tell him!
Separate names with a comma.