The Jalopy Journal
I was curious if anyone had identified the thread size on the back of the summit oil pressure guage?? I'm sure its like a lot of others on the...
So it looks like very soon I will be taking ownership of a 62 tempest. It will run and the trans seems to work but it needs brake work for sure. I...
I have a 63 pontiac 389 with the tri power. I bought 3 air cleaners and the base is to small for the outer two carbs. Im having trouble finding a...
[ATTACH][ATTACH] Sent from my VS985 4G using H.A.M.B. mobile app
Does anyone have a napa number for a round style coil with.5 or less ohms for hei? I would like something that's traditional looking but can use...
I'm building a 57 Pontiac wagon and having a hard time finding seafoam green vinyl. I ordered some from amazon and it was almost grey. Does anyone...
Does anyone have a suggestion on a good junkyard donor for a brake pedal. I would like something that bolts to the firewall. I can add bracing if...
I would like to add power steering to my 57 wagon. I have seen an article about using a 605 steering box. Is this a good upgrade?? I've also read...
I am building a 57 station wagon and I was cleaning my intake getting ready to paint. Its a 4bbl intake from a 347. Inside the exhaust crossover...
I don't have the original carb for my '60 pontiac 389. I was thinking of using one of the summit 600 cfm units. Anyone used one on a pontiac?...
Does anyone make a radiator for a 57 pontiac? How about some dimensions and I can maybe get a universal one to fit.
I am going to place a classified ad over in that section but before I do there is a few questions that I have. Does the power brake booster from a...
Well the title pretty much says it all. Could a jag IFS be redrilled to 5 x 5 bolt pattern to match my 57 pontiac? I could get a front end and...
Has anyone tried a heads up headliner conversion. If so how did it work? http://www.carkitsonline.com/product/?id=1064420
Let me know what ya think. I will post about my plans in a bit. Thanks!!! Posted using the Full Custom H.A.M.B. App!
I have a stock 283 going in my car. It has power pack heads on it. I have a good set of 186 double hump heads. Should I run either of those heads...
How many folks out there drive your car while your working on it. I have a 40 buick that I am working on and just mainly collecting parts for...
Ok so I am gathering parts and ideas for my '40 buick. I am trying to figure out the best way to handle the front suspension. As for the back its...
I am trying to get ideas on what carbs to run on a 327 going in my car. I am looking at one of the 2 x 2 adapters that summit or vintage speed...
Ok I am building a 1940 buick special with the 248 engine. I am installing a t5 behind it and an open driveline. I am trying to decide what gear...
Does anyone have any pics from swapping from the torque tube to an open rear? What rear did you use? I am going to stick a t5 behind the straight...
Ok guys school me on swapping from a tourque tube to an open driveline in the Buick. I know that I am going to put a t5 in behind the straight 8....
Hey guys wanted to say hey. I am from just outside Nashville Tn. My current project is a 40 buick special. I'm gonna need all the help I can get....
I just picked up a 40 buick special today. The car is in good original shape and I should have the engine running just as soon as I round up a...
Separate names with a comma.
The Jalopy Journal