The Jalopy Journal
Thanks to everyone that chimed in, offered advice, and offered up their own parts. Problem solved over here on my end. Got an AB coded Weiand...
Bump Sent from my iPhone using The H.A.M.B. mobile app
Yup I noted that above. The early variant like that noted in that eBay ad above (O4D) actually carried numbers denoting fitment. [IMG] The later...
I saw that, and was hopeful. Sadly it too would need to be machined. If you blow up the pic it’s stamped “57 58” just below the “O4D”. Those...
Hey Tubman, is it the super open plenum type where it has no exhaust crossover (just a thin blade of aluminum and a pad that covers the exhaust...
I don’t have access to a mill in order to do that. After looking at the runners I think the above comment is true.. there’s not enough meat in the...
Purchased this 59-64 371/394 Offy 2x4 intake hoping it had enough meat to machine down to fit a 324 (it don’t). My loss is your gain. Selling for...
The holes are about 2/3 covered (intake stud/bolt holes are significantly larger in diameter than threaded holes in the heads) [IMG][IMG] Sent...
Some pics may help I suppose. The outer flange appears plenty thick. Idk about the lower area. Hopefully I can get some clarity here....
Ok, so I’ll start by predicating that I’ve poured through threads for the answer already and read through tech to no avail. I have a late 371/394...
Hi y’all. Not new, but back after an 8 or so year hiatus... couldn’t remember all my old credentials and decided to have a fresh start.. things...
Separate names with a comma.
The Jalopy Journal