The Jalopy Journal
Had no idea this had a horn ring. Style makes more sense now. Sent from my SM-N960U using The H.A.M.B. mobile app
Hi John. Been many years. Retired from an outside job now. So I have unlimited hours for my projects. I thought I put the crossmember in...
Thanks. Will be a bit easier finding the horn button now Sent from my SM-N960U using The H.A.M.B. mobile app
Spring is straight! I was sure I put a 32 -34 spring in there. I will play with the mount plate on the bone and see what gives. Crossmember Too...
I found some of my old notes. Over the years I have had stockers and sometimes would take notes. 17 3/4 lower fender hole back to center of...
Looks like I should move axle back a bunch. I have heard 1/2 or so. This looks more like 1 1/2 inches. I can still put it anywhere. I am using...
Good to know. It was the standard body also, never any cowl lights. Just the cheap version lol Sent from my SM-N960U using The H.A.M.B. mobile app
Had this many years. Kinda matches my roadster for old poor condition. Be nice to find the horn button too. I can throw out the first...
I am going to do the pair of bolts thru them too Sent from my SM-N960U using The H.A.M.B. mobile app
I started out your way. Just trying to get this tucked up out of the way. Going back to the correct position on mounts. Making a bolt in bracket...
I found the old wolf post about bolts thru mounts. That looks like should do the trick for me. I may pass on of old age before it gets on the road...
So the key for me is to insure strength in the rubber/steel mount. I have very little room under trans. Mounts in original position hang way down....
Yes you are correct. I needed to get the mount up and so I drilled the car side to fit the bell Sent from my SM-N960U using The H.A.M.B. mobile app
If you look closer they are homemade from plate steel. I copied the 32 cast parts. Sent from my SM-N960U using The H.A.M.B. mobile app
Safety bolt sounds like cheap insurance Butch. I am going forward with the mounts upward. The bell is a RC industries NHRA approved so I think it...
Mr cheater I would have liked to go under but have the stock 32 wishbone down there. Crowded especially when I run exhaust. Sent from my SM-N960U...
Biggest reason for these mounts and not tail is I have a open lasalle trans here and would like to run it in place of muncie. No way to mount tail...
Car will be light and 1 wheel peel so not too concerned about torque breakage. If a mount should break trans can only drop an inch and its laying...
The bell is an old scattershield. Very thick and heavy. Mounts in original position hang low. Sent from my SM-N960U using The H.A.M.B. mobile app
Heres the front mounts. Trying to keep it all old school[ATTACH] Sent from my SM-N960U using The H.A.M.B. mobile app
Been a while since I posted here. I moved out in the sticks 16 years ago. Get maybe 2 or 3 different visitors a year. So. Sometimes I need...
Cool old truck. Missing engine. Set in a barn in North Dakota for many years. Rolls easy. Dry state truck. Drip rails clean and tight. Rockers and...
I wonder if you made a couple adapters to pressure tank if most of that would pop right out. For safety you could put it behind a wall while...
I have 6 single mag wheels for sale. 50 dollars each plus postage. Some are all aluminum some 2 piece. Looking for a single 15 by 7 magnesium...
gonna try one more bump........going to that auction site next. I can sell just the body parts or make an almost complete car.
I have decided to include the balance of parts for this car. All apart but only missing garnish and motor and trans. Original frame partly boxed....
Good old car body for sale. This body still has its original floor and wood in very good condition. This was a finished show rod in the 70's. I am...
My car is in post 14........I just found the body tag. First part is hard to make out but the number at end is 4983. Another for the list. If...
Pair of Henrys post and lower stanchions. Auction runs through Easter weekend. ebay item number 200909220574
I am currently pulling a 56 Olds(adapter to 39 trans to stock K member) out of my 32 chassis and putting a 56 chevy 265 in its place. Biggest...
Separate names with a comma.
The Jalopy Journal
