The Jalopy Journal
See ya on Sunday
Can you repost , it is a blur
HI All I have a1936 chevy sedan that needs wider rear fenders. How do I go about this? Thanks
Will be in the Muskegon part of it.
rain or shine got to go
I am in the prosses of building my 36 put Heidts on it had some frame damage cut off about 18" and welded on some 2x3' tube heidts to the tube....
If it is the one at a car dealer in St Charles stay home.
March 18 in Peotone, Feb 19 in west bend Wi. 3000 cty hwy pv. The big one April 27 -29 Jefferson Wi. Skips Mar 18 lake county Il.
Hi guys I am building a 36 chevy and starting on the brakes. I have a new master cyl. with 3/8 24, ports and a proportioning valve from a...
If you have a pipe from the house to the garage you can pull in some #8 wires good for 40 amps, #6 would be better good for 60 amps. Two hots one...
Just got a 66 mustang radiator for my 36 chevy from advance auto parts $115.00 size is good match
Welcome form Chicago! I also have a 36 chevy in progress, PM Me
OK in Chicago
Hi all What years are trunk lids interchangable for a 1936 chevy hump back? Thanks
Cool, keep it up. I will be in Oahu in January. Could bring parts.
HI from Des Plaines
Yep it has a engine siting on the frame supported by wood blocks, a mock up, can't move it like that
This lady's husband died and left a 1946 ford coupe mostly apart, it looks like it's all there, but hard to tell, no interior. Has Mustang II...
Sacrifice or my loss is your gain
Nice, how hard was the engine swap?
I have a miller but the same thing happened to me was fuse on circuit board.
I have a miller but the same thing happened to me was fuse on circet board.
Thanks guys thats the answer I was looking for
Yep that's what it's for and that's what I want to do, but don't want to cause any problems.
I see valves on the right head to shut off coolant to the heater would cause a hot spot?
Welcome from Des Plaines il
Ya can do it on the low buck and work for 5 cents a hour
32 Chevy I was 15, in 1965, friend of my older brother got drafted and sold it to me for $200. Pushed it home got it running and that's when the...
Thanks will do. only a few drops on the floor so I think it not the rear main
Yep I have one on order. However if it was coming from the rear seal could it get on the disc?
Separate names with a comma.