The Jalopy Journal
a guy by the name of dave baker posted on the 1956 Oldsmobile only page a frame for a S88 back in may if that helps.
you might try the facebook 54-56 olds pages, seen one there a few months ago. dont know if its still available or not.
Man, those are great looking trucks. if it was mine i would be working on it. if you need some inspiration here is a few pics i took at a few...
sweet car, you cant go wrong with the blue/gray on the continental. that looks like barry wolk's car, nice guy, if I remember correctly he has a...
great cars, drove a 56 for years as my daily. don't know if you do face book or not but there is a couple good 56 and 54-56 oldsmobile pages, lots...
nice looking car. if your looking for shared parts go with the same year buicks is your best bet.
your tank looks a lot like my 54 olds tank. you might try this place....
hears how i did my 54 olds. boat trailers work well for putting the body on and doing work on it.
a bunch of cement blocks, 2 1/2" pipe front and...
I could see a car body centered in one of those feeder rings. you could fab up a roller base to set it on like in 31vicky's[ATTACH] pics. similar...
^^i was just surprised to see another one. your dads is the original and definitely the coolest!!
sold, please remove
the body back on the frame. all that's left is to get it all squared up and finish bolting it down. surprisingly i only had 1 bolt to...
a few more progress pics.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
had to flatten the rear tires just a little to get a shade more...
the body, which has not been on the frame close to 20 years now. [ATTACH] [ATTACH] [ATTACH]
the start of getting it blocked up so i...
well i went and did it. the wife said it was never going to happen, and that pigs would fly and hell would would be a very cold place...
pulled the dash to make wiring easier and strip it down and remove assorted dents in it. i have to say lincoln did a good job of making...
a couple pics of the back all trim holes welded up around the tail lights[ATTACH] [ATTACH] and in primer.
been working on the wiring for this car, got a new harness and have been slowly getting it placed about the car. the area below the trunk...
YOur right HRP i know of a couple cars in garages that never move and used as shelves and the only reason i know they are there is because
must of been well hidden, I have lived in alliance for a long time and never seen it.
getting the rear quarters stripped, and in primer. also got most of the rust cut out in the rockers and in front of the wheel openings...
small rusty area on passenger side floor[ATTACH] [ATTACH]
the firewall was looking real ugly, cleaned, stripped and painted.[ATTACH] [ATTACH] [ATTACH] [ATTACH]
the drivers side floor was in bad shape so that was cut out and a new panel was welded in.[ATTACH] [ATTACH] [ATTACH]
progress pics because everybody like pics. overall the trunk area was in good shape so that was just cleaned and painted. my son made...
Separate names with a comma.