The Jalopy Journal
Did you use any form to hammer over?
Just found your build, looks great. Thanks for posting. Its fun to follow a long.
Thanks irishsteve looking for idea for bottom of glass. Trucks did not come with them.
Anyone ever come up with door glass seals were glass goes up and down? I know it's meant to drip out bottom of door. But want to sound deaden...
Starting on doors
Thanks for heads up. I will change.
Yep, that works too.
Steering damper goes from steering box rod to frame.
It's 1/4 + 10ga frame for taped hole. I agree bracket to brace hooky [ATTACH] [ATTACH]
20190130_193234 by Langan posted Mar 4, 2019 at 1:51 AM
Just looking for opinion on if I should leave like they are in picture, or make a brace to...
Thanks, just checking
Garnish and windshield chopped
At 1" below belt line do you overlap new door skin or but to the raw edge?
Gas tank baffles
Rear fender brace
Running board extention
Thanks for the leed
Thanks for that info. Makes me want to find out if anyone makes a modern wheel i could add stock centers to?
1979 or so Ford f350 wheels not the stockers. I here they are widow makers
Plenty of room for 700r4. Went to Pamona lots of insperation. I sure hope stock front axle and frame work well with the one ton wheels and 70 mph.
May still find a 700 and keep the ZZ4 and 200 for the MG TD
Separate names with a comma.